Skip to contentSkip to conversation

Micron NAND Driver

U-Boot-Users Raghu 2 participants 2 messages Mar 27, 2007

lore
Share & tools
lore

Raghu

author
#0 lore raw

Hello All,

I have a custom OMAP2430 board with Micron NAND (MT29F1G16ABB) as a PoP interface.

I have the Vendor ID and Device ID entried in the NAND.h file and during U-Boot start up I am able to see the prints called from "nand_init" function.

Is there a patch to add the READ/PROGRAM commands for this chip?

Thanks in advance.

Warm Regards,
Raghu

____________________________________________________________________________________
Be a PS3 game guru.
Get your game face on with the latest PS3 news and previews at Yahoo! Games.
http://videogames.yahoo.com/platform?platform=120121

#1 lore raw
Quoted 5 lines · Raghu

Hello All,

I have a custom OMAP2430 board with Micron NAND (MT29F1G16ABB) as a PoP interface.

Quoted 7 lines

I have the Vendor ID and Device ID entried in the NAND.h file and during U-Boot start up I am able to see the prints called from "nand_init" function.

Is there a patch to add the READ/PROGRAM commands for this chip?

Please refer to u-boot/doc/README.nand

-Aubrey