Skip to contentSkip to conversation

: no sound with azx driver in Realtek integrated sound chip

ALSA - driver 0000790 [email protected] 1 participant 1 message Jan 13, 2005

lore
Share & tools
lore
#0 lore raw

A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=790>
======================================================================
Reported By: theoneandonlysm
Assigned To:
======================================================================

Project:                    ALSA - driver
Issue ID:                   790
Category:                   PCI - azx
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     new
Distribution:               Slackware 10 (-current)
Kernel Version:             2.6.10
======================================================================
Date Submitted:             01-07-2005 01:38 CET
Last Modified:              01-13-2005 20:49 CET

======================================================================
Summary: no sound with azx driver in Realtek integrated sound
chip
Description:
Using the CVS checkout on 01/05/05 at 8:00 EDT, I compiled the alsa drivers with kernel 2.6.10 . Running alsaconf (provided by slackware), it was able to detect the azx module as the correct driver and modified by /etc/modprobe.conf as needed. Although alsamixer and kmix show all the channels and devices for the sound chip, I get no sound output.

Dmesg states:
PCI: Setting latency timer of device 0000:00:1b.0 to 64 ALSA /home/sandeep/alsa_cvs/alsa-driver/pci/azx/patch_realtek.c:953:
hda_codec: Unknown model for ALC880

I'm guessing there is just something specifically not included in the driver needed by this chip.

lsmod:

Module                  Size  Used by
snd_pcm_oss            59168  0
snd_mixer_oss          19840  1 snd_pcm_oss
snd_azx                12640  2
snd_hda_codec          46208  1 snd_azx
snd_pcm                96260  4 snd_pcm_oss,snd_azx,snd_hda_codec
snd_timer              23556  1 snd_pcm
snd                    58628  9

snd_pcm_oss,snd_mixer_oss,snd_azx,snd_hda_codec,snd_pcm,snd_timer
snd_page_alloc 8452 2 snd_azx,snd_pcm

lspci:
00:00.0 Host bridge: Intel Corp.: Unknown device 2580 (rev 04) 00:02.0 VGA compatible controller: Intel Corp.: Unknown device 2582 (rev
04)
00:02.1 Display controller: Intel Corp.: Unknown device 2782 (rev 04) 00:1b.0 Class 0403: Intel Corp.: Unknown device 2668 (rev 03) 00:1c.0 PCI bridge: Intel Corp. I/O Controller Hub PCI Express Port 0 (rev
03)
00:1d.0 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03) 00:1d.1 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03) 00:1d.2 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03) 00:1d.3 USB Controller: Intel Corp. I/O Controller Hub USB (rev 03) 00:1d.7 USB Controller: Intel Corp. I/O Controller Hub USB2 (rev 03) 00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev d3)
00:1f.0 ISA bridge: Intel Corp. I/O Controller Hub LPC (rev 03) 00:1f.1 IDE interface: Intel Corp. I/O Controller Hub PATA (rev 03) 00:1f.2 IDE interface: Intel Corp. I/O Controller Hub SATA cc=ide (rev
03)
00:1f.3 SMBus: Intel Corp. I/O Controller Hub SMBus (rev 03) 02:01.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80)
02:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

======================================================================

----------------------------------------------------------------------
theoneandonlysm - 01-08-05 02:21
----------------------------------------------------------------------
Great! Sound output works after passing model="3stack" or "5stack"; the 5stack option matches my device.

However, even after turning all the volumes up to 100, the sound output is relatively soft, and I can hear a faint buzz in the background.(Actually, turning up the headphone volume has no effect, I used the "front" control). Also, the audio port on the front of my machine does not output any sound.

lspci -nv:
00:1b.0 Class 0403: 8086:2668 (rev 03)
Subsystem: 103c:2a09
Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at cfdb8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-

        Capabilities: [70]

https://bugtrack.alsa-project.org/alsa-bug/view.php?id=10 [0091]

I am running in kde 3.3.2 with aRts enabled. Is there any other information I can provide?

----------------------------------------------------------------------
tiwai - 01-13-05 20:49
----------------------------------------------------------------------
Maybe the connection of headphone is different from the predefined one. Anyway I'll add your device to 5stack model as a temporary solution.

Could you check whether surround outputs and line/mic inputs work as expected?

I'm not sure what's wrong with the volume. Basically there are no many volume controls for this output route...

Issue History
Date Modified Username Field Change
======================================================================
01-07-05 01:38 theoneandonlysmNew Issue
01-07-05 01:38 theoneandonlysmDistribution => Slackware 10
(-current)
01-07-05 01:38 theoneandonlysmKernel Version => 2.6.10
01-07-05 17:50 tiwai Note Added: 0003102
01-08-05 02:20 theoneandonlysmNote Added: 0003126 01-08-05 02:21 theoneandonlysmNote Edited: 0003126
01-13-05 20:49 tiwai Note Added: 0003202
======================================================================

-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt