Skip to contentSkip to conversation

2.6.25-rc8 PHY Davicom DM9161AEP driver: incorrect mii_bus:phy_addr & irq detecting [AT91SAM9260-EK board]

DISCUSSION Oleg Strikov 1 participant 1 message Apr 7, 2008

lore
Share & tools
lore
#0 lore raw

We found that the latest kernel PHY Davicom DM9161A driver (linux/drivers/net/phy/davicom.c) does not work correctly with Davicom DM9161AEP PHY controller on Atmel AT91SAM9260-EK board. During init stage i get incorrect driver output:

Quoted 2 lines

eth0: Atmel MACB at 0xfffc4000 irq 21 (00:00:00:00:00:00)
eth0: attached PHY driver [Davicom DM9161A]

(mii_bus:phy_addr=ffffffff:00, irq=-1)

It seems that MACB initialization pass O.K.
&
PHY driver does not get correct phy_addr & irq values.

MB DM9161AEP controller cannot be handled by DM9161A driver, but it tries to catch it based in the same ID?