two exports on server, only one directory appears on client
Subsystems (2)
hi,
i have a problem mounting two separate directories on the client. the exports, on the server, are defined as two different directories. and exportfs -rav outputs the correct ipaddr:/path/to/mount on the server.
when i mount the separate directories on the client "mount -t nfs
ipaddr:/full/path /mnt/hd1" and "mount -t nfs ipaddr:/full/path /mnt/hd2" both directories on the client /mnt/hd1 and /mnt/hd2 list the contents of only hd2. for example, on the client, ls /mnt/hd1 outputs the same directories as ls /mnt/hd2. the server has the correct mount points /dev/sda1 as /mnt/1tb and /dev/sdb1 as /mnt/320gb.
here is the code to clarify:
# server output of `mount | grep /dev/sd` /dev/sda1 on /mnt/1tb type vfat (rw,noexec,nosuid,nodev,umask=000) /dev/sdb1 on /mnt/320gb type vfat (rw,noexec,nosuid,nodev,umask=000) # notes two different harddrives here, so the directories in each are different.
# server output of `cat /etc/exports` /mnt/1tb client-ipaddress(rw,fsid=0,subtree_check,no_root_squash,crossmnt,async) /mnt/320gb client-ipaddress(rw,fsid=0,subtree_check,no_root_squash,crossmnt,async)
# server output of `exportfs -rav` exporting client-ipaddress:/mnt/1tb exporting client-ipaddress:/mnt/320gb
### end of server ###
### client ###
# client commands mount -t nfs server-ip:/mnt/1tb /mnt/nfs-1tb mount -t nfs server-ip:/mnt/320gb /mnt/nfs-320gb
# client output of `mount | grep server-ip` server-ip:/mnt/1tb on /mnt/nfs-1tb (rw,addr=server-ip) server-ip:/mnt/320gb on /mnt/nfs-320gb (rw,addr=server-ip)
# client output of `ls /mnt/nfs-1tb` == `ls /mnt/nfs-320gb` # note the client output of these two commands should be the contents of server /dev/sda1 then server /dev/sdb1
my question is: how do i mount the two directories separately in order to list contents of both harddrives? is there a separator in /etc/exports that i am missing, causing it to read only the second export?
is there anything i am missing here?
Quoted 3 lines · On Sun, Dec 20, 2009 at 11:33 PM, f3ar007 <[email protected]> wrote:
hi,
i have a problem mounting two separate directories on the client. =A0=
the
Quoted 1 line
exports, on the server, are defined as two different directories. =A0=
and
Quoted 1 line
exportfs -rav outputs the correct ipaddr:/path/to/mount on the server=
=2E
Quoted 8 lines
=A0when i mount the separate directories on the client "mount -t nfs ipaddr:/full/path
/mnt/hd1" and "mount -t nfs ipaddr:/full/path/mnt/hd2" both directories on the client/mnt/hd1and/mnt/hd2list the contents of only hd2. =A0for example, on the client, ls/mnt/hd1outputs the same directories as ls/mnt/hd2. =A0the server has the correct mount points/dev/sda1as/mnt/1tband/dev/sdb1as/mnt/320gb.
Quoted 4 lines
here is the code to clarify:
# server output of `mount | grep /dev/sd` /dev/sda1 =A0on =A0/mnt/1tb =A0 =A0 =A0type vfat =A0(rw,noexec,nosuid=
,nodev,umask=3D000)
Quoted 1 line
/dev/sdb1=A0on =A0/mnt/320gb =A0type vfat =A0(rw,noexec,nosuid,nodev=
,umask=3D000)
Quoted 1 line
# notes two different harddrives here, so the directories in each are=
different.
Quoted 3 lines
# server output of `cat /etc/exports` /mnt/1tb =A0 =A0 client-ipaddress(rw,fsid=3D0,subtree_check,no_root_s=
quash,crossmnt,async)
Quoted 1 line
/mnt/320gbclient-ipaddress(rw,fsid=3D0,subtree_check,no_root_squash,=
crossmnt,async)
I think the problem is that you have specified that both are fsid=3D0. There should only be one export with fsid=3D0