Yocto build Issue
A message that is not in the archive (sent off-list or not yet received): [email protected]
Forward to this yocto mailing list.
When you have problems regarding yocto, use this mailing list.
Regards,
Chen Qi
Quoted 14 lines · Pawan Badganchi
Hello sir,
I am adding
IMAGE_INSTALL_append= "kernel-modules" in
local.conf.When i build with bitbake core-image-minimal command this kernel module is loading.while i build with bitbake atmel-qt5-demo-image command kernel module is not loading.Please tell us what is the issue.
Thanks & Regards,
Pawan
can you please send to me the link.
Thanks & Regards,
Pawan
On June 28, 2019 at 5:50 AM ChenQi <[email protected]> wrote:
Forward to this yocto mailing list.
When you have problems regarding yocto, use this mailing list.
Regards,
Chen Qi
On 06/27/2019 06:57 PM, Pawan Badganchi wrote:
Hello sir,
I am adding IMAGE_INSTALL_append = "kernel-modules" in local.conf.When i build with bitbake core-image-minimal command this kernel module is loading.while i build with bitbake atmel-qt5-demo-image command kernel module is not loading.
Please tell us what is the issue.
Thanks & Regards,
Pawan
Some hints again...
Quoted 5 lines
I am adding
IMAGE_INSTALL_append= "kernel-modules" in local.conf. When i build with bitbake core-image-minimal command this kernel module is loading.while i build with bitbake atmel-qt5-demo-image command kernel module is not loading.
Please tell us what is the issue.
Here is what local.conf I am using as included minimal kernel source tree (also with systemd included). Please, try to experiment with it!
https://github.com/ZoranStojsavljevic/bbb-yocto/blob/master/bbb-releases/bbb-warrior/local.conf_full.
I use to compile the YOCTO Warrior minimal system for BBB the following command:
bitbake -k core-image-minimal
Hope this helps!
Best Regards,
Zoran
Quoted 27 lines · ChenQi
Forward to this yocto mailing list.
When you have problems regarding yocto, use this mailing list.Regards,
Chen QiOn 06/27/2019 06:57 PM, Pawan Badganchi wrote:
Hello sir,
I am adding
IMAGE_INSTALL_append= "kernel-modules" in local.conf.When i build with bitbake core-image-minimal command this kernel module is loading.while i build with bitbake atmel-qt5-demo-image command kernel module is not loading.Please tell us what is the issue.
Thanks & Regards,
Pawan
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Thanks for response.I will check with this command.
On June 28, 2019 at 9:45 AM Zoran Stojsavljevic <[email protected]> wrote:
Some hints again...I am adding IMAGE_INSTALL_append = "kernel-modules" in local.conf. When i build with bitbake core-image-minimal command this kernel
module is loading.while i build with bitbake atmel-qt5-demo-image command kernel module is not loading.
Please tell us what is the issue.
Here is what local.conf I am using as included minimal kernel source tree (also with systemd included). Please, try to experiment with it!
https://github.com/ZoranStojsavljevic/bbb-yocto/blob/master/bbb-releases/bbb-warrior/local.conf_full.
I use to compile the YOCTO Warrior minimal system for BBB the following command:
bitbake -k core-image-minimal
Hope this helps!
Best Regards,
Zoran
Quoted 1 line · ChenQi
Forward to this yocto mailing list.
When you have problems regarding yocto, use this mailing list.Regards,
Chen QiOn 06/27/2019 06:57 PM, Pawan Badganchi wrote:Hello sir,I am adding IMAGE_INSTALL_append = "kernel-modules" in local.conf.When i build with bitbake core-image-minimal command this kernel module is loading.while i build with bitbake atmel-qt5-demo-image command kernel module is not loading.Please tell us what is the issue.Thanks & Regards,Pawan>
Quoted 2 lines
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Hello sir,
I am building qt image with bitbake atmel-qt5-demo-image command.After booting the kernel i am giving modprobe option and echo 0x2949 0x8247 > /sys/bus/usb-serial/drivers/option1/new_id command to enumerate the usb ports.with this modprobe option is not working,it's giving modprobe: FATAL: Module option not found in directory /lib/modules/4.14.73-linux4sam-6.0-dirty
error.
with bitbake core-image-minimal image modprobe option and echo 0x2949 0x8247 > /sys/bus/usb-serial/drivers/option1/new_id two cammands are working fine and usb ports are enumerating.
Please tell us how to include kernel-modules in atmel-qt5-demo-image image.
Thanks & Regards,
Pawan
On June 28, 2019 at 9:45 AM Zoran Stojsavljevic <[email protected]> wrote:
Some hints again...I am adding IMAGE_INSTALL_append = "kernel-modules" in local.conf. When i build with bitbake core-image-minimal command this kernel
module is loading.while i build with bitbake atmel-qt5-demo-image command kernel module is not loading.
Please tell us what is the issue.
Here is what local.conf I am using as included minimal kernel source tree (also with systemd included). Please, try to experiment with it!
https://github.com/ZoranStojsavljevic/bbb-yocto/blob/master/bbb-releases/bbb-warrior/local.conf_full.
I use to compile the YOCTO Warrior minimal system for BBB the following command:
bitbake -k core-image-minimal
Hope this helps!
Best Regards,
Zoran
Quoted 1 line · ChenQi
Forward to this yocto mailing list.
When you have problems regarding yocto, use this mailing list.Regards,
Chen QiOn 06/27/2019 06:57 PM, Pawan Badganchi wrote:Hello sir,I am adding IMAGE_INSTALL_append = "kernel-modules" in local.conf.When i build with bitbake core-image-minimal command this kernel module is loading.while i build with bitbake atmel-qt5-demo-image command kernel module is not loading.Please tell us what is the issue.Thanks & Regards,Pawan>
Quoted 2 lines
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto