smp hangs with 2.2.19 kernel
Hallo, I have a problem with a dual processor machine. With Red Hat 2.2.19 kernel, but with every 2.2.1x kernel, from Red Hat or self compiled, the machine hangs with lot of processes in D state:
vmstat output is
procs memory swap io system cpu r b w swpd free buff cache si so bi bo in cs us sy id 1 225 2 0 10632 10936 16456 0 0 6 3 14 9 6 3 14
The memory situation:
[root@petra petra]# free
total used free shared buffers
cached
Mem: 523800 504688 19112 0 10620
31352
-/+ buffers/cache: 462716 61084
Swap: 2097136 35164 2061972
The box has 5 scsi disks with a aic7xxx controller. 4 disks are in RAID 1, the fifth is only used for the swap partition (2 GB).
When the machine hangs there are no logs.
Is there a way I can debug the cause?
Thanks in advance,
andrea
Signature · 2 lines
Andrea Dell'Amico <[email protected]> - Link s.r.l. <http://www.link.it>
Hi,
I'm too chasing this one. I have only one IDE drive and an SCSI controller which is mostly idle but sometimes used for a scanner. At first I thought is was hardware but I'm going to believe it is a software problem. I replaced most of the hardware even the motherboard.
2.2.19 with PIII-667 Mhz/128MB MSI 594D mobo.
Kees
Quoted 45 lines · Andrea Dell'Amico
Hallo, I have a problem with a dual processor machine. With Red Hat 2.2.19 kernel, but with every 2.2.1x kernel, from Red Hat or self compiled, the machine hangs with lot of processes in D state:
vmstat output is
procs memory swap io system cpu r b w swpd free buff cache si so bi bo in cs us sy id 1 225 2 0 10632 10936 16456 0 0 6 3 14 9 6 3 14The memory situation:
[root@petra petra]# free
total used free shared buffers
cached
Mem: 523800 504688 19112 0 10620
31352
-/+ buffers/cache: 462716 61084
Swap: 2097136 35164 2061972The box has 5 scsi disks with a aic7xxx controller. 4 disks are in RAID 1, the fifth is only used for the swap partition (2 GB).
When the machine hangs there are no logs.
Is there a way I can debug the cause?
Thanks in advance,
andreaSignature · 9 lines
Andrea Dell'Amico <[email protected]> - Link s.r.l. <http://www.link.it> - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Hi,
I have solid hangs (no log) with SMP machine for some time. I swapped almost all of the hardware (incl mobo).
Dual PIII 677 MHZ on MSI 694D mobo. I had the hangs with 2.2.19 AND now also with 2.4.4. I linked the kdb in the kernel and when the lockup occurred I was able the get some info (serial console).
This is the kdb output for linux-2.4.4
[1]kdb> rd
eax = 0x00000001 ebx = 0xc0c57bc0 ecx = 0x00000020 edx = 0x00000001 esi = 0xc03de880 edi = 0x00000004 esp = 0xc2137ed0 eip = 0xc0108b6a ebp = 0xc2137edc xss = 0x00000018 xcs = 0x00000010 eflags = 0x00000002 xds = 0xc1220018 xes = 0xc03d0018 origeax = 0x00000001 ®s = 0xc2137e9c [1]kdb>
[1]kdb> cpu
Currently on cpu 1
Available cpus: 0*, 1
[1]kdb>
[1]kdb> bt
EBP EIP Function(args)0xc2137edc 0xc0108b6a handle_IRQ_event+0x2e (0x4, 0xc2137f10, 0xc0c57bc0, 0xc2a98005, 0x0)
kernel .text 0xc0100000 0xc0108b3c 0xc0108bc4
0xc0108d9c do_IRQ+0xa8
kernel .text 0xc0100000 0xc0108cf4 0xc0108df0
0xc0106e10 ret_from_intr
kernel .text 0xc0100000 0xc0106e10 0xc0106e30Interrupt registers:
eax = 0x0000006b ebx = 0xc2a98005 ecx = 0xc2137fa0 edx = 0xc2a98001 esi = 0x00000000 edi = 0xc12cc7e0 esp = 0xc2137f44 eip = 0xc013f183 ebp = 0xc2137f68 xss = 0x00000018 xcs = 0x00000010 eflags = 0x00000216 xds = 0xc2a90018 xes = 0xc2a90018 origeax = 0xffffff04 ®s = 0xc2137f10
0xc013f183 path_walk+0x24f (0xc2a98006, 0xc2137fa0)
kernel .text 0xc0100000 0xc013ef34 0xc013f7f0
0xc2137f84 0xc013fcd0 __user_walk+0x3c (0x805c808, 0x9, 0xc2137fa0)
kernel .text 0xc0100000 0xc013fc94 0xc013fcf0
0xc2137fbc 0xc013c33b sys_newstat+0x17 (0x805c808, 0xbfffed28, 0x805c808, 0xbfffee34, 0x805c808)
kernel .text 0xc0100000 0xc013c324 0xc013c394
0xc0106d37 system_call+0x37
kernel .text 0xc0100000 0xc0106d00 0xc0106d40[1]kdb>
What can I do next? I have the bt for all processes in a file.
regards
Kees