Skip to contentSkip to conversation

cdrecord with LSI53C1010 and Yamaha CRW2100S

DISCUSSION C. Linus Hicks 3 participants 3 messages Sep 4, 2001

lore
Share & tools
lore
#0 lore raw

I have been unsuccessful trying to burn a CD-R since upgrading my computer and I'm not sure where to go with this. I decided to try here. I suspect a problem with the SYM53C8xx driver, and I think there may also be additional problems elsewhere. My old system worked. It was:

RedHat 7.0 with 2.2.19 kernel
ASUS P2B-DS (440BX chipset) with 2 600MHz Intel processors On-board Adaptec AIC-7890 with the new aic7xxx driver Add-on Adaptec 2940 PCI adapter (narrow devices attached here) Yamaha CRW6416S CD writer

My new system:

RedHat 7.1 with 2.4.8-ac11 kernel
Tyan Thunder HEsl S2567 (ServerWorks chipset) with 2 1000MHz Intel processors
On-board LSI 53C1010-66 (running at 33MHz) dual channel SCSI Add-on LSI21003 with 53C1010-33 (narrow devices here) SYM53C8xx driver
Yamaha CRW2100S CD writer

I looked for problem reports with the 2100S and didn't see any, rather several reports that it worked okay. I updated the firmware to the latest - 1.0N and it didn't help.

I have tried several versions of cdrecord including the latest 1.11a05 with associated tools to no avail.

When I try burning a CD, sometimes I get errors and sometimes it appears to work. When I try to mount a CD-R that burned successfully in a Toshiba DVD-ROM drive, I get errors like this:

[root@lh2 /root]# mount /mnt/cdrom
mount: wrong fs type, bad option, bad superblock on /dev/cdrom,
or too many mounted file systems
[root@lh2 /root]#

And in /var/log/messages:

Sep  4 16:31:18 LH2 kernel: sym53c1010-33-1:4: ERROR (0:18) (1-21-0)
(10/30) @ (script 8e8:110007c1).
Sep  4 16:31:18 LH2 kernel: sym53c1010-33-1: script cmd = 88080000
Sep  4 16:31:18 LH2 kernel: sym53c1010-33-1: regdump: da 10 c0 30 47 10
04 0e 80 01 84 21 80 01 01 00 00 b0 d6 37 08 00 00 00.
Sep  4 16:31:18 LH2 kernel: sym53c1010-33-1: ctest4/sist original
0x8/0x18  mod: 0x18/0x0
Sep  4 16:31:18 LH2 kernel: sym53c1010-33-1: restart (scsi reset).
Sep  4 16:31:18 LH2 kernel: sym53c1010-33-1: handling phase mismatch
from SCRIPTS.
Sep  4 16:31:18 LH2 kernel: sym53c1010-33-1: Downloading SCSI SCRIPTS.
Sep  4 16:31:20 LH2 kernel: sym53c1010-33-1-<4,*>: FAST-20 SCSI 20.0
MB/s (50.0 ns, offset 16)
Sep  4 16:31:20 LH2 kernel:  I/O error: dev 0b:00, sector 68
Sep  4 16:31:20 LH2 kernel: isofs_read_super: bread failed, dev=0b:00,

iso_blknum=17, block=17

I tried replacing the LSI21003 with a 2940 and burned a CD-R. The process went smoothly with no errors reported. I mounted the burned CD in the Toshiba successfully and listed the contents. I did not think to verify the CD with the mastered file. I then switched back to the LSI21003 and tried to mount the burned CD-R. I got:

[root@lh2 /root]# mount /mnt/cdrom
mount: Not a directory
[root@lh2 /root]#

And in /var/log/messages:

Sep  4 15:15:47 LH2 kernel: scsi : aborting command due to timeout : pid
0, scsi1, channel 0, id 4, lun 0 Read (10) 00 00 00 00 1c 00 00 01 00
Sep  4 15:15:47 LH2 kernel: sym53c8xx_abort: pid=0 serial_number=149685
serial_number_at_timeout=149685
Sep  4 15:15:48 LH2 kernel: SCSI host 1 abort (pid 0) timed out -
resetting
Sep  4 15:15:48 LH2 kernel: SCSI bus is being reset for host 1 channel
0.
Sep  4 15:15:48 LH2 kernel: sym53c8xx_reset: pid=0 reset_flags=2
serial_number=149685 serial_number_at_timeout=149685
Sep  4 15:15:48 LH2 kernel: sym53c1010-33-1: restart (scsi reset).
Sep  4 15:15:48 LH2 kernel: sym53c1010-33-1: handling phase mismatch
from SCRIPTS.
Sep  4 15:15:48 LH2 kernel: sym53c1010-33-1: Downloading SCSI SCRIPTS.
Sep  4 15:15:48 LH2 kernel: sym53c1010-33-1-<4,*>: FAST-20 SCSI 20.0
MB/s (50.0 ns, offset 16)
Sep  4 15:15:48 LH2 kernel: Device 0b:00 not ready.
Sep  4 15:15:48 LH2 kernel:  I/O error: dev 0b:00, sector 112
Sep  4 15:15:49 LH2 kernel: ISOFS: unable to read i-node block
Sep  4 15:15:49 LH2 kernel: Device 0b:00 not ready.
Sep  4 15:15:49 LH2 kernel:  I/O error: dev 0b:00, sector 128
Sep  4 15:15:49 LH2 kernel: ISOFS: unable to read i-node block

Any help would be appreciated, and if anyone needs additional information I will be glad to do what I can.

Linus

#1 lore raw
Quoted 21 lines · C. Linus Hicks

I have been unsuccessful trying to burn a CD-R since upgrading my computer and I'm not sure where to go with this. I decided to try here. I suspect a problem with the SYM53C8xx driver, and I think there may also be additional problems elsewhere. My old system worked. It was:

RedHat 7.0 with 2.2.19 kernel
ASUS P2B-DS (440BX chipset) with 2 600MHz Intel processors On-board Adaptec AIC-7890 with the new aic7xxx driver Add-on Adaptec 2940 PCI adapter (narrow devices attached here) Yamaha CRW6416S CD writer

My new system:

RedHat 7.1 with 2.4.8-ac11 kernel
Tyan Thunder HEsl S2567 (ServerWorks chipset) with 2 1000MHz Intel processors
On-board LSI 53C1010-66 (running at 33MHz) dual channel SCSI Add-on LSI21003 with 53C1010-33 (narrow devices here) SYM53C8xx driver
Yamaha CRW2100S CD writer

Quoted 3 lines

I looked for problem reports with the 2100S and didn't see any, rather several reports that it worked okay. I updated the firmware to the latest - 1.0N and it didn't help.

I can affirm that the CRW2100S is not the problem as it's been working correctly on my P2B-S (AIC7890). The CRW2100S has firmware 1.0H.

Signature · 2 lines
Cliff Albert		| RIPE:	     CA3348-RIPE | www.oisec.net
[email protected]		| 6BONE:     CA2-6BONE	 | icq 18461740
#2 lore raw
In reply to C. Linus Hicks
Quoted 54 lines · C. Linus Hicks

I have been unsuccessful trying to burn a CD-R since upgrading my computer and I'm not sure where to go with this. I decided to try here. I suspect a problem with the SYM53C8xx driver, and I think there may also be additional problems elsewhere. My old system worked. It was:

RedHat 7.0 with 2.2.19 kernel
ASUS P2B-DS (440BX chipset) with 2 600MHz Intel processors On-board Adaptec AIC-7890 with the new aic7xxx driver Add-on Adaptec 2940 PCI adapter (narrow devices attached here) Yamaha CRW6416S CD writer

My new system:

RedHat 7.1 with 2.4.8-ac11 kernel
Tyan Thunder HEsl S2567 (ServerWorks chipset) with 2 1000MHz Intel processors
On-board LSI 53C1010-66 (running at 33MHz) dual channel SCSI Add-on LSI21003 with 53C1010-33 (narrow devices here) SYM53C8xx driver
Yamaha CRW2100S CD writer

I looked for problem reports with the 2100S and didn't see any, rather several reports that it worked okay. I updated the firmware to the latest - 1.0N and it didn't help.

I have tried several versions of cdrecord including the latest 1.11a05 with associated tools to no avail.

When I try burning a CD, sometimes I get errors and sometimes it appears to work. When I try to mount a CD-R that burned successfully in a Toshiba DVD-ROM drive, I get errors like this:

[root@lh2 /root]# mount /mnt/cdrom
mount: wrong fs type, bad option, bad superblock on /dev/cdrom,
or too many mounted file systems
[root@lh2 /root]#

And in /var/log/messages:

Sep  4 16:31:18 LH2 kernel: sym53c1010-33-1:4: ERROR (0:18) (1-21-0)
(10/30) @ (script 8e8:110007c1).
Sep  4 16:31:18 LH2 kernel: sym53c1010-33-1: script cmd = 88080000
Sep  4 16:31:18 LH2 kernel: sym53c1010-33-1: regdump: da 10 c0 30 47 10
04 0e 80 01 84 21 80 01 01 00 00 b0 d6 37 08 00 00 00.
Sep  4 16:31:18 LH2 kernel: sym53c1010-33-1: ctest4/sist original
0x8/0x18  mod: 0x18/0x0
Sep  4 16:31:18 LH2 kernel: sym53c1010-33-1: restart (scsi reset).
Sep  4 16:31:18 LH2 kernel: sym53c1010-33-1: handling phase mismatch
from SCRIPTS.
Sep  4 16:31:18 LH2 kernel: sym53c1010-33-1: Downloading SCSI SCRIPTS.
Sep  4 16:31:20 LH2 kernel: sym53c1010-33-1-<4,*>: FAST-20 SCSI 20.0
MB/s (50.0 ns, offset 16)
Sep  4 16:31:20 LH2 kernel:  I/O error: dev 0b:00, sector 68
Sep  4 16:31:20 LH2 kernel: isofs_read_super: bread failed, dev=0b:00,
Quoted 4 lines

iso_blknum=17, block=17

I tried replacing the LSI21003 with a 2940 and burned a CD-R. The process went smoothly with no errors reported.

The ERROR (0:18) thing indicates a SCSI GROSS ERROR problem. In other words, the controller is seing a severe transport error on the SCSI BUS. This is often due to a SCSI BUS problem. Decreasing the data throughput can make the problem less likely to happen, but this is obviously a poor workaround.

Could you check the synchronous data parameters negotiated with the Adaptec. If speed is lower than 20 MB/s and/or offset is lower than 16, then we may well just be comparing oranges and apples.

Quoted 4 lines

I mounted the burned CD
in the Toshiba successfully and listed the contents. I did not think to verify the CD with the mastered file. I then switched back to the LSI21003 and tried to mount the burned CD-R. I got:

Hmmm... If you just hot-switch the device then the breakage seems normal. Can I assume you didn't do so ?:)

Quoted 29 lines

[root@lh2 /root]# mount /mnt/cdrom
mount: Not a directory
[root@lh2 /root]#

And in /var/log/messages:

Sep  4 15:15:47 LH2 kernel: scsi : aborting command due to timeout : pid
0, scsi1, channel 0, id 4, lun 0 Read (10) 00 00 00 00 1c 00 00 01 00
Sep  4 15:15:47 LH2 kernel: sym53c8xx_abort: pid=0 serial_number=149685
serial_number_at_timeout=149685
Sep  4 15:15:48 LH2 kernel: SCSI host 1 abort (pid 0) timed out -
resetting
Sep  4 15:15:48 LH2 kernel: SCSI bus is being reset for host 1 channel
0.
Sep  4 15:15:48 LH2 kernel: sym53c8xx_reset: pid=0 reset_flags=2
serial_number=149685 serial_number_at_timeout=149685
Sep  4 15:15:48 LH2 kernel: sym53c1010-33-1: restart (scsi reset).
Sep  4 15:15:48 LH2 kernel: sym53c1010-33-1: handling phase mismatch
from SCRIPTS.
Sep  4 15:15:48 LH2 kernel: sym53c1010-33-1: Downloading SCSI SCRIPTS.
Sep  4 15:15:48 LH2 kernel: sym53c1010-33-1-<4,*>: FAST-20 SCSI 20.0
MB/s (50.0 ns, offset 16)
Sep  4 15:15:48 LH2 kernel: Device 0b:00 not ready.
Sep  4 15:15:48 LH2 kernel:  I/O error: dev 0b:00, sector 112
Sep  4 15:15:49 LH2 kernel: ISOFS: unable to read i-node block
Sep  4 15:15:49 LH2 kernel: Device 0b:00 not ready.
Sep  4 15:15:49 LH2 kernel:  I/O error: dev 0b:00, sector 128
Sep  4 15:15:49 LH2 kernel: ISOFS: unable to read i-node block
Quoted 2 lines

Any help would be appreciated, and if anyone needs additional information I will be glad to do what I can.

I suggest you to define some lower data speed in the NVRAM and see if it makes differences. OTOH, if the Adaptec is using a different (assumed lower) speed you may give a try with the C1010-33 at the same speed. You may let me know the results.

Regards,
Gérard.