Skip to contentSkip to conversation

radeonfb bug: text ends up scrolling in the middle of t

DISCUSSION Petr Vandrovec 1 participant 1 message Nov 20, 2001

lore
Share & tools
lore
#0 lore raw
Quoted 9 lines · Dan Merillat
Quoted 1 line

they'll shed some light on the problem.

Yes, yes. The boot messages are normal, and typing 'reset' once I login restores normal console. The code that sets up a scrolling window below tux is well, missing the mark.

Tux looks like he's about 5 lines high, so lines 1-3 are tux, 4 is the one line of scroll, 5 is his feet, and 6-30 is the previous kernel boot messages.

It is known problem. At least known to me. After reboot and typing 'reset' type 'dmesg' and then look for 'Console: switching to colour frame buffer device...'. Above that message you'll find couple of radeon messages - and you have to remove all printed during register_framebuffer() from driver source - it looks to me like that '#if 1'-ed code in radeon_write_code is suspect.

You must not do any output during register framebuffer. If you'll output one line, I believe that it will still work, but if you'll do more, kernel output is catched in upper Tux window instead of in the bottom half of screen. And if you'll print really much of info during register_framebuffer, kernel will die...
Best regards,
Petr Vandrovec [email protected]