Skip to contentSkip to conversation

SGTL5000 audio codec freescale

DISCUSSION [email protected] 2 participants 2 messages Jul 1, 2021

lore
Share & tools
lore
#0 lore raw

na árvore de arquivos do kernel linux padrão tem os arquivos "sgtl5000.c" e "sgtl5000.h" que controlam o chip do codec. Como faço para incluir esses arquivos ao construir uma nova distro com o yocto?

#1 lore raw

Hello "nanotech.ei",

Quoted 2 lines · On Thu, Jul 1, 2021 at 8:01 PM <[email protected]> wrote:

na árvore de arquivos do kernel linux padrão tem os arquivos "sgtl5000.c" e "sgtl5000.h" que controlam o chip do codec. Como faço para incluir esses arquivos ao construir uma nova distro com o yocto?

I believe that vast majority of the recipients are multi-lingual and you would have better chances to address your questions in English.

In addition, this is a cross-posting of the similar question you tried to address on the [meta-freescale] ML
(https://lists.yoctoproject.org/g/meta-freescale/message/24705) where you asked about Raspberry PI HW. This machine is not a Freescale/NXP machine, and this perhaps left your question unattended.

I guess a bit more specific information is required about the target HW you're trying to integrate this codec with.

As for the Kernel: mainline does provide support for SGTL5000 IC (since 2011), have a look at the SND_SOC_SGTL5000 config option in the kernel.

Quoted 2 lines
Signature · 2 lines
Regards,
Andrey.