Skip to contentSkip to conversation

VIA USB Controller - (Wrong ID) ??

DISCUSSION Jesper Juhl 3 participants 4 messages Aug 19, 2005 – Aug 22, 2005

lore
Share & tools
lore
#0 lore raw

I've just noticed that my USB controller(s) show up as having "Wrong ID" and now I'm wondering what exactely that means and what I can do about it (kernel 2.6.13-rc6-mm1 in case it matters).

Is it a wrong PCI ID? If so, how's the controller recognized at all?

I stopped by http://pci-ids.ucw.cz/iii// which had an entry saying :

0925 VIA Technologies, Inc. (Wrong ID)
Wrong ID used in subsystem ID of VIA USB controllers.

but that doesn't whed much light for me.

Here's a snippet from lspci :

00:04.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 16) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 3
Region 4: I/O ports at d400 [size=32]
Capabilities: <available only to root>

00:04.3 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 16) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium

Quoted 1 line

TAbort- <TAbort- <MAbort- >SERR- <PERR-

Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 3
Region 4: I/O ports at d000 [size=32]
Capabilities: <available only to root>

Can anyone explain this to me? The controllers are working just
fine, so it's not too important, I'm just a currious nature :)

Signature · 3 lines
Jesper Juhl <[email protected]>
Don't top-post  http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please      http://www.expita.com/nomime.html
#1 lore raw

Hello,

Quoted 11 lines · Jesper Juhl wrote/

I've just noticed that my USB controller(s) show up as having "Wrong ID" and now I'm wondering what exactely that means and what I can do about it (kernel 2.6.13-rc6-mm1 in case it matters).

Is it a wrong PCI ID? If so, how's the controller recognized at all?

I stopped by http://pci-ids.ucw.cz/iii// which had an entry saying :

0925 VIA Technologies, Inc. (Wrong ID)
Wrong ID used in subsystem ID of VIA USB controllers.

I've never heard of this before. However, cheking the list shows that every vendor which has a "Wrong ID" entry also a normal one. So my guess is that "wrong ID" means that somewhere in the process of putting the PCI ID (during the design of the device) someone mistook which ID to put. So this would mean that your device doesn't have the official ID of VIA, but it uses an unofficial one (famous enough to be listed though). Nothing to worry about.

:

Quoted 7 lines

00:04.3 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 16) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller

Can anyone explain this to me? The controllers are working just
fine, so it's not too important, I'm just a currious nature :)

Well, as I said before, it's just pure guess, but it's cool to invent stories ;-)

Eric

#3 lore raw
In reply to Vojtech Pavlik
Quoted 29 lines · Vojtech Pavlik
Quoted 28 lines · Eric Piel

Hello,

Quoted 11 lines · Jesper Juhl wrote/

I've just noticed that my USB controller(s) show up as having "Wrong ID" and now I'm wondering what exactely that means and what I can do about it (kernel 2.6.13-rc6-mm1 in case it matters).

Is it a wrong PCI ID? If so, how's the controller recognized at all?

I stopped by http://pci-ids.ucw.cz/iii// which had an entry saying :

0925 VIA Technologies, Inc. (Wrong ID)
Wrong ID used in subsystem ID of VIA USB controllers.

I've never heard of this before. However, cheking the list shows that every vendor which has a "Wrong ID" entry also a normal one. So my guess is that "wrong ID" means that somewhere in the process of putting the PCI ID (during the design of the device) someone mistook which ID to put. So this would mean that your device doesn't have the official ID of VIA, but it uses an unofficial one (famous enough to be listed though). Nothing to worry about.

:

Quoted 5 lines

00:04.3 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 16) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller

Quoted 9 lines
Quoted 5 lines
Quoted 2 lines

Can anyone explain this to me? The controllers are working just
fine, so it's not too important, I'm just a currious nature :)

Well, as I said before, it's just pure guess, but it's cool to invent stories ;-)

It's a correct guess, though. They mixed up the vendor and device IDs in the subsystem ID of their USB controllers.

Thank you for the explanation guys.

Signature · 3 lines
Jesper Juhl <[email protected]>
Don't top-post  http://www.catb.org/~esr/jargon/html/T/top-post.html
Plain text mails only, please      http://www.expita.com/nomime.html
#2 lore raw
In reply to Eric Piel
Quoted 28 lines · Eric Piel

Hello,

Quoted 11 lines · Jesper Juhl wrote/

I've just noticed that my USB controller(s) show up as having "Wrong ID" and now I'm wondering what exactely that means and what I can do about it (kernel 2.6.13-rc6-mm1 in case it matters).

Is it a wrong PCI ID? If so, how's the controller recognized at all?

I stopped by http://pci-ids.ucw.cz/iii// which had an entry saying :

0925 VIA Technologies, Inc. (Wrong ID)
Wrong ID used in subsystem ID of VIA USB controllers.

I've never heard of this before. However, cheking the list shows that every vendor which has a "Wrong ID" entry also a normal one. So my guess is that "wrong ID" means that somewhere in the process of putting the PCI ID (during the design of the device) someone mistook which ID to put. So this would mean that your device doesn't have the official ID of VIA, but it uses an unofficial one (famous enough to be listed though). Nothing to worry about.

:

Quoted 5 lines

00:04.3 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0 controller] (rev 16) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller

Quoted 5 lines
Quoted 2 lines

Can anyone explain this to me? The controllers are working just
fine, so it's not too important, I'm just a currious nature :)

Well, as I said before, it's just pure guess, but it's cool to invent stories ;-)

It's a correct guess, though. They mixed up the vendor and device IDs in the subsystem ID of their USB controllers.

Signature · 2 lines
Vojtech Pavlik
SuSE Labs, SuSE CR