Skip to contentSkip to conversation

Dell BIOS and HPET timer support

DISCUSSION Jon Smirl 2 participants 3 messages Jun 8, 2005

lore
Share & tools
lore

Jon Smirl

author
#0 lore raw

After several communications with Dell support I have determined that most Dell BIOSs don't include the ACPI entry for the HPET timer. The official reason for this is that no version of Windows uses the HPET and adding the ACPI entry might cause compatibility problems.

So I added this to force the HPET on:
extern unsigned long hpet_address;
hpet_address = 0xfed00000ULL;

Now my HPET seems to be working:
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 0ns tick, 3 64-bit timers
Using HPET for base-timer
Using HPET for gettimeofday

What does the 0ns tick mean, is this bad? Is there any way to verify my HPET is working correctly? My date/time is advancing.

If my HPET is working correctly is it ok to add a probe to find the timer?

Signature · 2 lines
Jon Smirl
[email protected]
#1 lore raw
Quoted 4 lines · Jon Smirl

After several communications with Dell support I have determined that most Dell BIOSs don't include the ACPI entry for the HPET timer. The official reason for this is that no version of Windows uses the HPET and adding the ACPI entry might cause compatibility problems.

What platform/BIOS version please? PowerEdge x8xx servers certainly do have HPET enabled in their ACPI tables.

Thanks,
Matt

Signature · 4 lines
Matt Domsch
Software Architect
Dell Linux Solutions linux.dell.com & www.dell.com/linux
Linux on Dell mailing lists @ http://lists.us.dell.com
author
#2 lore raw
Quoted 8 lines · Matt Domsch
Quoted 4 lines · Jon Smirl

After several communications with Dell support I have determined that most Dell BIOSs don't include the ACPI entry for the HPET timer. The official reason for this is that no version of Windows uses the HPET and adding the ACPI entry might cause compatibility problems.

What platform/BIOS version please? PowerEdge x8xx servers certainly do have HPET enabled in their ACPI tables.

All Dell PE400SC, Dim8300, Precision360 for sure. From my talk with them none of the desktops have it enabled. They acknowledge that it is on for some server boxes but not for most other systems.

Signature · 2 lines
Jon Smirl
[email protected]