ERROR - Could not suspend device 0000:00:1d.7: error -5

DISCUSSION boltmelots 3 participants 5 messages Mar 6, 2005 – Mar 9, 2005 5 messages not in the archive ACPI

Share & tools

boltmelots

author

2005-03-06 12:20 UTC #0 lore raw

Hi all:
I have recently installed FC3 on my inspiron 500m. when I try 'echo standby > /sys/power/state', I am not able to go into standby. When I run dmesg this is the output it produces. I have no idea what it means, can someone point me in the right direction please? thank you very much.
--
Setu.

::::::DMESG OUTPUT:::::
Stopping tasks:
==================================================================================| Badness in hcd_unlink_urb at drivers/usb/core/hcd.c:1243

 [<02280052>] hcd_unlink_urb+0x18a/0x3ca
 [<02280dd7>] usb_kill_urb+0x11d/0x26a
 [<02209409>] acpi_ut_update_ref_count+0x36/0x45
 [<0220960c>] acpi_ut_update_object_reference+0x1f4/0x22d
 [<02200be4>] acpi_evaluate_object+0x194/0x1a0
 [<0227bef8>] hub_quiesce+0x12/0x49
 [<0227d3fe>] hub_suspend+0x1d/0x79
 [<0227b158>] usb_generic_suspend+0x38/0x3a
 [<02245488>] suspend_device+0x28/0x2f
 [<022454e3>] device_suspend+0x54/0xd8
 [<0213d706>] suspend_prepare+0x48/0x6f
 [<0213d7b3>] enter_state+0x32/0x5e
 [<0213d8bf>] state_store+0x83/0x91
 [<0213d83c>] state_store+0x0/0x91
 [<021aad7b>] subsys_attr_store+0x19/0x21
 [<021aaeee>] flush_write_buffer+0x1d/0x22
 [<021aaf15>] sysfs_write_file+0x22/0x35
 [<021656fa>] vfs_write+0xb6/0xe2
 [<021657c4>] sys_write+0x3c/0x62

PCI: Setting latency timer of device 0000:00:1d.7 to 64 hub 1-0:1.0: hub_port_status failed (err = -19)
hub 1-0:1.0: hub_port_status failed (err = -19)
hub 1-0:1.0: hub_port_status failed (err = -19)
hub 1-0:1.0: hub_port_status failed (err = -19)
hub 1-0:1.0: hub_port_status failed (err = -19)
hub 1-0:1.0: hub_port_status failed (err = -19)
hub 1-0:1.0: reactivate --> -19
ehci_hcd 0000:00:1d.7: HC died; cleaning up
Could not suspend device 0000:00:1d.7: error -5
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1f.6 to 64
ACPI: PCI interrupt 0000:01:03.0[A] -> GSI 7 (level, low) -> IRQ 7 hub 1-0:1.0: hub_port_status failed (err = -19)
hub 1-0:1.0: hub_port_status failed (err = -19)
hub 1-0:1.0: hub_port_status failed (err = -19)
hub 1-0:1.0: hub_port_status failed (err = -19)
hub 1-0:1.0: hub_port_status failed (err = -19)
hub 1-0:1.0: hub_port_status failed (err = -19)
hub 1-0:1.0: reactivate --> -19
hub 1-0:1.0: hub_port_status failed (err = -19)
hub 1-0:1.0: hub_port_status failed (err = -19)
hub 1-0:1.0: hub_port_status failed (err = -19)
hub 1-0:1.0: hub_port_status failed (err = -19)
hub 1-0:1.0: hub_port_status failed (err = -19)
hub 1-0:1.0: hub_port_status failed (err = -19)
hub 1-0:1.0: reactivate --> -19
hub 2-0:1.0: reactivate --> -22
hub 3-0:1.0: reactivate --> -22
hub 4-0:1.0: reactivate --> -22
Restarting tasks... done

-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): 200503061625.25161.destynova-iUB+o6dfpG8i1yMB4YHZDQ@public.gmane.org

boltmelots

author

2005-03-06 22:36 UTC #3 lore raw

Hi:
Thank you very much for your reply.
As you said I removed ehci_hcd and uhci_hcd from the running modules and tried, 'echo standby > /sys/power/state' : This I assume worked because all i see on the screen is:
Stopping tasks:
==================================================================================| But trying to resume the thing is a problem, it produces a bunch of errors that i have no idea what it means. I have to manually reboot the computer, because it freezes. How can I extract the errors? I think I will write them down on paper :-S

I also tried 'echo mem > /sys/power/state', and that works too. But on resume the screen is blank. No idea what is happening!

Dam, microsoft makes it look so easy!!

Thanks again for replying.

Kind Regards,
--
Setu.

Quoted 10 lines · Oisín Mac Fhearaí

Quoted 1 line · boltmelots
=======| Badness in hcd_unlink_urb at drivers/usb/core/hcd.c:1243
Why don't you try unloading some of the usb modules before suspending? I do "/sbin/rmmod uhci_hcd" beforehand in my script, as this one used to cause some problems.
It looks like you might want to rmmod ehci_hcd, by the entries in the log.
Oisín

A message that is not in the archive (sent off-list or not yet received): 9ed79ee00503061436228f66c2-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org

Pavel Machek

2005-03-08 11:07 UTC #5 lore raw

Quoted 12 lines · boltmelots

Hi:
Thank you very much for your reply.
As you said I removed ehci_hcd and uhci_hcd from the running modules and tried, 'echo standby > /sys/power/state' : This I assume worked because all i see on the screen is:
Stopping tasks:
==================================================================================| But trying to resume the thing is a problem, it produces a bunch of errors that i have no idea what it means. I have to manually reboot the computer, because it freezes. How can I extract the errors? I think I will write them down on paper :-S

Quoted 2 lines

I also tried 'echo mem > /sys/power/state', and that works too. But on resume the screen is blank. No idea what is happening!

Read Doc*/power/video.txt. Also try to get swsusp working, first.

Ugh, I'd suggest using your real name in From: header, no m$ references and less !s if you want to get answers in future.

Pavel

Signature · 9 lines

People were complaining that M$ turns users into beta-testers...
...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click

A message that is not in the archive (sent off-list or not yet received): 20050308110742.GC23640-I/[email protected]

boltmelots

author

2005-03-09 08:03 UTC #7 lore raw

Hello:
There you go, I changed to my real name.
Thank you for your suggestions Pavel and Osin. I am really busy at work at the moment, but I plan to try what you said in a few days. I will let you know of the outcome, successful or not.
One question though:
where is the Doc*/power/video.txt?? I don't think I have stumbled across this on the net.

Thank you for putting up with me, but I am still learning :-)

Kind Regards,
--
Setu.

Quoted 18 lines · Pavel Machek

Quoted 12 lines · boltmelots
Hi:
Thank you very much for your reply.
As you said I removed ehci_hcd and uhci_hcd from the running modules and tried, 'echo standby > /sys/power/state' : This I assume worked because all i see on the screen is:
Stopping tasks:
==================================================================================| But trying to resume the thing is a problem, it produces a bunch of errors that i have no idea what it means. I have to manually reboot the computer, because it freezes. How can I extract the errors? I think I will write them down on paper :-S
Quoted 2 lines
I also tried 'echo mem > /sys/power/state', and that works too. But on resume the screen is blank. No idea what is happening!
Read Doc*/power/video.txt. Also try to get swsusp working, first.

Quoted 9 lines

Ugh, I'd suggest using your real name in From: header, no m$ references and less !s if you want to get answers in future.
Pavel
--
People were complaining that M$ turns users into beta-testers... ...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!

A message that is not in the archive (sent off-list or not yet received): 9ed79ee0050309000341e8bdb9-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org

Pavel Machek

2005-03-09 09:24 UTC #9 lore raw

Hi!

Quoted 7 lines

There you go, I changed to my real name.
Thank you for your suggestions Pavel and Osin. I am really busy at work at the moment, but I plan to try what you said in a few days. I will let you know of the outcome, successful or not.
One question though:
where is the Doc*/power/video.txt?? I don't think I have stumbled across this on the net.

In your /usr/src/linux directory. Documentation/power/video.txt.

Pavel

Signature · 9 lines

People were complaining that M$ turns users into beta-testers...
...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click