IBM Thinkpad T21: Hotplugging of cdrom and floppy devices
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 8 lines · In clouddancer.list.kernel,
When I put off my floppy-device (
/dev/fd1) and put in my cdrom-device (/dev/hdc; both no pcmcia-devices) or vice versa, the kernel doesn't recognize this change. The change - LED of the laptop is blinking until I suspend the laptop for example with apm -s or with the keyboard Fn-F4 and rewake it. After this "little sleep", the kernel suddenly knows about the new hardware and it can handle it.
Quoted 7 lines
I tested the hotplugging-feature of the kernel 2.4.x - but I couldn't get it working.
Is there any other possibility to give the kernel a chance to detect a hardware change without going through the suspend-mode? I mean, is there a piece of software, which does the same as in the wake-up-situation of the notebook after suspend?
The Thinkpad linux webpages mention : suspend, swap device, unsuspend.
I suspect there is a BIOS function that handles the device change, since that is where the suspend actually occurs. Windows must call it directly. Hotplugging is for the standard interfaces, the thinkpad Ultrabay is unique. You should probably be asking the IBM linux group.
Signature · 1 line
Windows 2001: "I'm sorry Dave ... I'm afraid I can't do that."
Quoted 5 lines
I suspect there is a BIOS function that handles the device change, since that is where the suspend actually occurs. Windows must call it directly. Hotplugging is for the standard interfaces, the thinkpad Ultrabay is unique. You should probably be asking the IBM linux group.
My first guess would be that you want to look at the PNPBIOS support from the -ac tree and see if you get PNPBIOS events.