Skip to contentSkip to conversation

Kernel "Oops" output

DISCUSSION Aubrey Kilpatrick 2 participants 2 messages May 12, 2001

lore
Share & tools
lore
#0 lore raw

Hello,

I have a K6-2D 333MHz system with Red Hat 7.0 (with updates) that gives the following "oops" output when I execute the "shutdown -h now" command. I tried to find the "opps" output in the /var/log/messages file but there is nothing there. The system hangs at the last line of the oops output to the screen and will not accept any commands. The only recourse at this point is to "CTRL-ALT-DEL" and let the system reboot.

The oops out follows:

Power down

general protection fault: f000
CPU: 0

EIP: 005: [<00008865>]
EFLAGS: 00010046
eax: 00005301 ebx: 00000001 ecx: 00000000 edx: c1239de0

esi: c0258136 edi: c1239e8c ebp: 67890000 esp: c1239de0

ds: 0058 es: 0000 ss: 0018

Process halt (pid: 869, stackpage=c1239000)

Stack:  9e8c82df   8136c123   0000c025   9e026789   0001c123   00000000

00030000 53070000

        00000000   00000000   81250058   80fa6aac   000080cd   00160000

00488036 bffffcc8

        c01118a4   00000010   bffffcc8   c1239e8c   00000018   00000018

00000292 00000000

Call Trace: [<c01118a4>] [<c0111963>] [<c0111991>] [<c01119e7>] [<f000bcd0>]

[<fee1dead>] [<c010741b>]

[<c011f3ed>] [<c020ea40>] [<c011debb>] [<c011df45>] [<c011e1ad>] [<c011e8b9>] [<c0144fe5>] [<c0133d26>]

[<c0113e4d>] [<c0108fb3>] [<fee1dead>] [<fee1dead>]

Code: Bad EIP value.

/etc/rc0.d/S01halt: line 1: 869 Segmentation fault halt -i -d -p

end of oops output and system hangs.

More system info:

DFI Motherboard (P5BV3+)
64M RAM
Mitsumi 40X CD-ROM
2.4G hard drive
17" CTX Monitor
4Meg Trident 3D Image 975 Chipset (Video 77/87/L87PCI/AGP (v6.45.5423b.98) PS2 Mouse
101 Keyboard

If there is additional system/hardware info you need to fix this problem please let me know and I will be glad to try and get it for you.

Thank you for your help.

Aubrey Kilpatrick

email at:  [email protected]
phone:  USA 1-334-493-4962 
#1 lore raw
Quoted 11 lines

tried to find the "opps" output in the /var/log/messages file but there is nothing there. The system hangs at the last line of the oops output to the screen and will not accept any commands. The only recourse at this point is to "CTRL-ALT-DEL" and let the system reboot.

The oops out follows:

Power down

general protection fault: f000
CPU: 0

EIP: 005: [<00008865>]

That is a bug in the APM BIOS on your machine. Upgrading to 2.2.19 and enabling the real mode bios poweroff might help..