unresolved symbol snd_verbose_printk with alsa-driver-0.9.8 (also with 0.9.7c)
unresolved symbol snd_verbose_printk with alsa-driver-0.9.8 (also with 0.9.7c)
System Background:
My system is a recently installed Mandrake Linux 9.1 with kernel-sources installed.
I am trying ALSA to get sound from a Vortex au8820.
I am a noobie but posting here because this is where other messages about similar problems are in the archives.
I am happy to provide other info as requested, but will have some delays - I am trying Mandrake on a wintel 486 about 3 years old but with linux on a separate drive. I have lots of problems with unsupported devices such as camera, scanner, winmodem (trying Linuxant and can dial but not connect yet).
Issue Background:
After Reading and following
http://alsa.opensrc.org/index.php?page=Quick+Install+-+snd-au88x0
I had the following issues.
These issues have been exactly the same with alsa-driver-0.9.7c.tar.bz2 and alsa-driver-0.9.8 after patching as per the patch (a posting by Eric Hathaway) at:
http://www.mail-archive.com/[email protected]/maillist.html#09813
which makes changes to a file with Khexedit so it appears to have been compiled with gcc3 rather than 2 and adds several lines to various makefiles that seemed to be missing from the alsa drivers compared to the ones at Openvortex at Savannah.
Before doing the suggested patching there were other problems with unresolved symbols as per that page, but after the patching the only one left is .
[root@localhost alsa-utils-0.9.8]# modprobe snd-au8820;modprobe snd-pcm-oss;modprobe snd-mixer-oss; modprobe snd-seq-oss /lib/modules/2.4.21-0.13mdk/kernel/sound/acore/snd.o: unresolved symbol snd_verbose_printk
modprobe: insmod /lib/modules/2.4.21-0.13mdk/kernel/sound/acore/snd.o failed
modprobe: insmod snd-au8820 failed/lib/modules/2.4.21-0.13mdk/kernel/sound/acore/snd.o: unresolved symbol snd_verbose_printk
modprobe: insmod /lib/modules/2.4.21-0.13mdk/kernel/sound/acore/snd.o failed
modprobe: insmod snd-pcm-oss failed/lib/modules/2.4.21-0.13mdk/kernel/sound/acore/snd.o: unresolved symbol snd_verbose_printk
modprobe: insmod /lib/modules/2.4.21-0.13mdk/kernel/sound/acore/snd.o failed
modprobe: insmod snd-mixer-oss failed/lib/modules/2.4.21-0.13mdk/kernel/sound/acore/snd.o: unresolved symbol snd_verbose_printk
modprobe: insmod /lib/modules/2.4.21-0.13mdk/kernel/sound/acore/snd.o failed
modprobe: insmod snd-seq-oss failed
[root@localhost alsa-utils-0.9.8]#
I made sure the kernel-source was installed:
[root@localhost alsa-utils-0.9.8]# urpmi kernel-source Everything already installed
[root@localhost alsa-utils-0.9.8]#
I note that there is another post in the user list with the same problem:
http://www.mail-archive.com/[email protected]/msg09716.html
but with no answers. I note he also uses Mandrake 9.1 as do I.
I could not find any resolution to this problem in a search of the archives, although I found four posts with the general issue of unresolved symbols that mentioned the same one, but among several others.
A www.google.com search for "unresolved symbol snd_verbose_printk" shows 37 posts, so this appears not to be an isolated problem. From the search results it appears to have been an issue across distros and for a number of alsa-driver releases.
I would be most grateful if anyone can help.
Cheers
Paul
au8820 was Re: unresolved symbol snd_verbose_printk with alsa-driver-0.9.8 (also with 0.9.7c)
In reply to a message not in the archiveau8820 working with alsa-driver-0.9.8 (and utils, tools oss and lib)
With thanks to Richard Lemon and Toby Haynes (from Openvortex list) I now have alsa-***-0.9.8 working and sound from my aureal 8820 Turtle Beach Montego under Mandrake 9.1 on a clone pentium ii 450 box with 128 meg Ram originally bought with windows98 about 4 years ago - Mandrake is installed on my old 10gb drive while windows and 4 years of data lives on a new 80gb drive.
I have posted the following to http://www.linuxquestions.org/questions/ in reply to a post entitled: SuSE 8.2 and Turtle Beach sound
to try and help someone else and it summarises how I got there.
I hope it will be helpful to others.
Cheers and thanks again and also to Eric Hathaway and all who worked on the alsa drivers and the au8820 page at
http://alsa.opensrc.org/index.php?page=au88x0
Paul
Two posts read both before starting:
First post (Second one follows below it after a row of ***)
make sure the kernel-source is installed before you start eg:
[root@localhost alsa-utils-0.9.8]# urpmi kernel-source
If you don't have permission type su (to login as a Super User)
Read this first so you can make the relevant changes based on the patch when it appears to fail:
http://www.mail-archive.com/alsa-de...list.html#09813
The changes are made in the file mentioned in the top of each section and the changes are the addition of the lines marked with a +
Read the directions at:
http://alsa.opensrc.org/index.php?page=au88x0 and others linked but particularly
http://alsa.opensrc.org/index.php?p...ll+-+snd-au88x0
but note that you probably won't have the files in a different location than a downloads directory in the same path as in the example, so you will have to make some adjustments.
http://alsa-project.org and download the files versions 0.9.8 there are 4 or 5 different files driver, lib, oss, utils, tools. They are all tar.bz2
Use the Quick install directions above. The drivers file takes about 30 mins to do make on my 400mHz pii400.
Check whether you need to make the changes suggested in the patch mentioned in the post referred to above.
Even after all this I end up with a failure during the modprobe stage because of:
unresolved symbol snd_verbose_printk
I am trying to get answers to this from the alsa-devel lists at:
http://www.alsa-project.org/mailing-lists.php3
You might like to view the archives or search the lists. The alsa-user list also has some posts with the same problem I am having.
The only other post I have seen that suggests that a solution has worked to unresolved symbols issues is:
http://lists.debian.org/debian-user...6/msg04413.html
You can try www.google.com with a search for your problem eg:
unresolved symbol snd_verbose_printk
and that may turn up a solution.
You might be luckier than me because clearly some people are having success with the new alsa drivers.
Good luck
Paul
**************
Second Post:
Mine works fine now, so it can be done!
The exact reference to the Quick install instructions referred to in my earlier post is:
http://alsa.opensrc.org/index.php?p...ll+-+snd-au88x0
After I had everything working (having checked using lsmod from the command line as su to see that snd-au8820 was in the list) I still had some problems with sound stopping working and kmix having a blank screen. These problems were solved when I followed the directions at:
http://alsa.opensrc.org/index.php?p...dules.conf+file
My reference to the page:
http://www.mail-archive.com/alsa-de...list.html#09813
should also have added that the post you need to read is:
[Alsa-devel] aureal driver compile problem and patch
From: Carolyn and Eric Hathaway <10/30/2003>
This tells you how to solve problems caused by different compiler versions having been used compared to what your distro has installed eg gcc2 vs gcc3 and how to patch various makefiles to avoid some unresolved symbol problems.
Don't forget you have to configure before you make.
My problem with:
unresolved symbol snd_verbose_printk
was solved by using a different configure line someone suggested:
./configure --with-isapnp=no --with-cards=au8820 --with-sequencer=yes --with -oss=yes --disable-verbose-printk
1 Download all alsa-***- 0.9.8 tar.bz2 files into a new directory. If you want to exactly follow the Quick install instructions above it needs to be in the same place as his Downloads directory in the example
2 unzip
3 make Hathaway's suggested changes re gcc2 > gcc3 and patch makefiles as suggested
4 run the configure suggested above (modified for your system if necessary) while in the driver unzipped directory
5 follow the Quick Install directions remembering that you *may have to ./configure *some of the others (utils, tools, oss) first as well - I just tried them all.
6 follow the directions re the modules.conf file
7 check that the snd-au8820 module has loaded by doing lsmod from the command line
7 open alsamixergui and unmute and increase volumes of the master and relevant others
8 try it all out and repost if you still have problems
Hope this gets you there
cheers
Paul
----- Original Message -----
From: "Frans Ketelaars" <[email protected]>
To: "Paul Hanly (Hotmail)" <[email protected]>
Sent: Wednesday, November 12, 2003 1:59 AM
Subject: Re: [Alsa-devel] unresolved symbol snd_verbose_printk with alsa-driver-0.9.8 (also with 0.9.7c)
Quoted 19 lines · Paul Hanly (Hotmail)
Quoted 14 lines
unresolved symbol
snd_verbose_printkwith alsa-driver-0.9.8 (also with 0.9.7c)System Background:
My system is a recently installed Mandrake Linux 9.1 with kernel-sources installed. I am trying ALSA to get sound from a Vortex au8820.
I am a noobie but posting here because this is where other messages about similar problems are in the archives. I am happy to provide other info as requested, but will have some delays - I am trying Mandrake on a wintel 486 about 3 years old but with linux on a separate drive. I have lots of problems with unsupported devices such as camera, scanner, winmodem (trying Linuxant and can dial but not connect yet).Perhaps you will have better hardware support in Mandrake 9.2 (
http://www.mandrakelinux.com/en/ ) but note this:
Quoted 13 lines
October 24th, 2003 - Important notice! - Several users have reported a big issue with LG Cd-rom drives used with Mandrake Linux 9.2: these CD-rom drives are not compliant with ATAPI specification and therefore can be damaged. All details, future updates and possible fix related to this issue are available at this page. Other Cd-rom drives are not affected by this issue. Update - Nov 3rd, 2003: due to this issue, the release of Mandrake 9.2 public ISO images has been delayed for a few days.
Quoted 4 lines
Issue Background:
After Reading and following
http://alsa.opensrc.org/index.php?page=Quick+Install+-+snd-au88x0
I had the following issues.
trimmed
-------------------------------------------------------
This SF.Net email sponsored by: ApacheCon 2003, 16-19 November in Las Vegas. Learn firsthand the latest developments in Apache, PHP, Perl, XML, Java, MySQL, WebDAV, and more! http://www.apachecon.com/