Skip to contentSkip to conversation

Promise 20378 + 2.6.0-test10 + libata patch 1

DISCUSSION Joe Blow 2 participants 2 messages Nov 30, 2003 – Dec 1, 2003

lore
Share & tools
lore

Joe Blow

author
#0 lore raw

I have applied the libata patch 1 to kernel 2.6.0-test10. I can now see the PDC RAID controller via the hardware browser, but I can not see any of the attatched PATA drives. (I do not have any SATA drives).

I have tried the controller set to RAID and IDE. I can not locate the attached PATA drives in /proc/ide or /proc/scsi, nor does the hardware browser see them. I #define ATA_VERBOSE_DEBUG and I did not find any addtional output in dmesg.

Does this driver not support PATA drives attatched to this controller?

Thanks for any help.

_________________________________________________________________
Groove on the latest from the hot new rock groups! Get downloads, videos, and more here. http://special.msn.com/entertainment/wiredformusic.armx

#1 lore raw
Quoted 6 lines · Joe Blow

I have applied the libata patch 1 to kernel 2.6.0-test10. I can now see the PDC RAID controller via the hardware browser, but I can not see any of the attatched PATA drives. (I do not have any SATA drives).

I have tried the controller set to RAID and IDE. I can not locate the attached PATA drives in /proc/ide or /proc/scsi, nor does the hardware browser see them. I #define ATA_VERBOSE_DEBUG and I did not find any addtional output in dmesg.

Does this driver not support PATA drives attatched to this controller?

Nope, libata Promise driver only supports Serial ATA.

Jeff