Skip to contentSkip to conversation

Frame Buffer Problem .

DISCUSSION Petr Vandrovec 1 participant 1 message Sep 9, 2003

lore
Share & tools
lore
#0 lore raw
Quoted 2 lines · Zoup

got blank screen when enable Frame Buffer console on 2.6.0-test5 :) Config file attached .

Do not enable vga16, vesafb and riva together. Decided for only one of them, and use just that one. Although your configuration should give you /dev/fb0 on riva, /dev/fb1 on vesafb and /dev/fb2 on vga16, it looks like that you got reordered framebuffers somehow. Did not you pass 'video=vga16fb:XXXX' option to the kernel? What kernel cmdline you used?

Other possibility is that vga16 setup confused your hardware enough for picture to disappear... Doing 'cat /proc/fb > /non-working-fbs; dmesg >> /non-working-fbs' after you boot your system with non-working display could give us clue what's going on. But in any case, do not use more than one fbdev...
Petr Vandrovec