Bug in sysfs bin attribute?
We have added sysfs bin_attribute 'fw_dump' in qla4xxx driver. Here is patch for same: -
http://marc.info/?l=linux-scsi&m=133733192809849&w=2
In this patch in function qla4_8xxx_sysfs_write_fw_dump() if we print string coming in 'char *buf'
from sysfs attribute it contain value we echo on sysfs attribute 'fw_dump' plus some garbage data.
If I write "5" to sysfs attribute I am getting following string in buf : -
May 18 12:08:00 magana kernel: ---------------- May 18 12:08:00 magana kernel: buf: 5 May 18 12:08:00 magana kernel: /../../host10 <-- Garbage data May 18 12:08:00 magana kernel: ----------------
Because of this garbage data kstrtol() fails in function qla4_8xxx_sysfs_write_fw_dump().
If we use simple_strtol() instate of kstrtol() it works well. But simple_strtol() is deprecated
so we can't use this API.
Solution to this, for now are writing "0" at buf[1] as we are interested only in value at buf[0].
I am interested to know if the behavior of sysfs attribute is correct or is it an issue?
Thanks,
Vikas.
This message and any attached documents contain information from QLogic Corporation or its wholly-owned subsidiaries that may be confidential. If you are not the intended recipient, you may not read, copy, distribute, or use this information. If you have received this transmission in error, please notify the sender immediately by reply e-mail and then delete this message.
Quoted 10 lines · Vikas Chaudhary
We have added sysfs
bin_attribute'fw_dump' in qla4xxx driver. Here is patch for same: -
http://marc.info/?l=linux-scsi&m=133733192809849&w=2In this patch in function
qla4_8xxx_sysfs_write_fw_dump()if we print string coming in 'char *buf'
from sysfs attribute it contain value we echo on sysfs attribute 'fw_dump' plus some garbage data.
Why are you not using the built-in firmware interface the kernel provides you? What does it lack that you need here?
greg k-h
-----Original Message-----
From: "[email protected]" <[email protected]>
To: Vikas Chaudhary <[email protected]>
Cc: linux-kernel <[email protected]>, Mike Christie <[email protected]>, James Bottomley <[email protected]>, Lalit Chandivade <[email protected]>, Ravi Anand <[email protected]>
Subject: Re: Bug in sysfs bin attribute?
Quoted 7 lines · Vikas Chaudhary
Quoted 6 lines
We have added sysfs
bin_attribute'fw_dump' in qla4xxx driver. Here is patch for same: -
http://marc.info/?l=linux-scsi&m=133733192809849&w=2
Quoted 8 lines
Quoted 5 lines
In this patch in function
qla4_8xxx_sysfs_write_fw_dump()if we print string coming in 'char *buf'
from sysfs attribute it contain value we echo on sysfs attribute 'fw_dump'
plus some garbage data.Why are you not using the built-in firmware interface the kernel provides you? What does it lack that you need here?
In this patch we are not trying to load firmware, Here we are trying to collect
firmware dump in case of adapter firmware crash. The firmware dump is in driver buffer
and we want to extract it at user space using the sysfs bin attribute.
This message and any attached documents contain information from QLogic Corporation or its wholly-owned subsidiaries that may be confidential. If you are not the intended recipient, you may not read, copy, distribute, or use this information. If you have received this transmission in error, please notify the sender immediately by reply e-mail and then delete this message.