Issue with authentication to Aerohive APs
You're right, I did accidentally filter out acks. I have an updated filtered capture attached.
It could be either, but I'm going off of wpa_supplicant instructing to transmit the 2nd EAPOL frame, but it never showing up in the air. The consultations I've received so far indicated that it would more likely be a driver/firmware issue, but I don't have enough experience with Linux supplicants to be sure about that.
Steve Bateman
Wireless Engineer
________________________________________
The FoundationGet Back To Work.
311 North 7th Avenue
Minneapolis, MN 55401
612.465.0700 Main
612.787.3202 Direct
612.338.9322 Faxhttp://www.fndtn.com <http://www.fndtn.com/>
Facebook <http://www.facebook.com/thefndtn> | Twitter
<http://twitter.com/thefndtn> | LinkedIn
<http://www.linkedin.com/companies/276539>
Quoted 19 lines · Johannes Berg
Quoted 5 lines · Steven Bateman
I'm writing on behalf of about 4 or 5 users that are having issues connecting to a WLAN that I manage. The majority of the information can be
found at the following link, including relevant logs. I've enclosed the packet capture from next to the station with failed authentications.How did you capture/filter the attached file? It shows no acknowledgement of the EAPOL packets, but no retries either, so you probably filtered out the acknowledgements. That leads me to believe that maybe there was something wrong with those EAPOL frames, maybe
wpa_supplicantdidn't get or didn't expect them?What makes you so sure it's a driver/firmware bug rather than a bug related to
wpa_supplicantor interaction with it?johannes
Quoted 8 lines · Steven Bateman
You're right, I did accidentally filter out acks. I have an updated filtered capture attached.
It could be either, but I'm going off of
wpa_supplicantinstructing to transmit the 2nd EAPOL frame, but it never showing up in the air. The consultations I've received so far indicated that it would more likely be a driver/firmware issue, but I don't have enough experience with Linux supplicants to be sure about that.
Ohh. Ok. Yeah then it's most likely a driver bug. Hmm. I vaguely remember bugs like this but I thought they were all fixed.
Is there any chance you could try to put the particular AP into 2.4 GHz? Although I guess you have similar APs on 2.4 GHz channels that work? Could you (or the user actually running into the problem) collect tracing maybe?
http://wireless.kernel.org/en/developers/Documentation/mac80211/tracing
johannes
I met a problem when I set to 5Mhz
Mode A can't work...
Do you have some ideas on this issue?
Best Regards.
--------------------------------------
Bopeng Liu
WIND RIVER | China Development Center
Phone: 8610-6483-5012
________________________________________
From: [email protected] [[email protected]] on behalf of Johannes Berg [[email protected]]
Sent: Thursday, January 23, 2014 11:59 PM
To: Steven Bateman
Cc: Linux Wireless
Subject: Re: Issue with authentication to Aerohive APs
Quoted 8 lines · Steven Bateman
You're right, I did accidentally filter out acks. I have an updated filtered capture attached.
It could be either, but I'm going off of
wpa_supplicantinstructing to transmit the 2nd EAPOL frame, but it never showing up in the air. The consultations I've received so far indicated that it would more likely be a driver/firmware issue, but I don't have enough experience with Linux supplicants to be sure about that.
Ohh. Ok. Yeah then it's most likely a driver bug. Hmm. I vaguely remember bugs like this but I thought they were all fixed.
Is there any chance you could try to put the particular AP into 2.4 GHz? Although I guess you have similar APs on 2.4 GHz channels that work? Could you (or the user actually running into the problem) collect tracing maybe?
http://wireless.kernel.org/en/developers/Documentation/mac80211/tracing
johannes
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 5 lines · Bopeng
I met a problem when I set to 5Mhz
Mode A can't work...
Do you have some ideas on this issue?
STOP! Don't hijack other threads, keep your own. Otherwise I'll just have to add you to a blacklist and never see email from you again.
johannes