Meta layer for Cavium CNS3xxx ARM processor
Quoted 10 lines · Abhinav (Abhinav)
Hi,
I am looking for an meta layer which provide support for Cavium CNS3xxx SOC as need to build some application on that platform. Below is the output from the board when I check for the release and CPU information
$ cat /etc/*release MontaVista Linux 6, (.dev-snapshot-20130726)
Quoted 8 lines
$ cat /proc/cpuinfoProcessor : ARMv6-compatible processor rev 4 (v6l)BogoMIPS : 279.34Features : swp half thumb fastmult vfp edsp javaCPU implementer : 0x41CPU architecture: 7CPU variant : 0x0CPU part : 0xb02CPU revision : 4 Hardware : Cavium Networks CNS3420 Validation BoardRevision : 0000Serial : 0000000000000000So is there any meta layer which supports above SOC.
You can find out about such things in the layer index:
http://layers.openembedded.org/layerindex/branch/master/machines/
Make sure to select the correct branch on the left side of the menu.
Cheers
Belén
Quoted 4 lines
Thanks,
Abhinav
Hi,
I didn't find a match for Cavium CNS3412.
Is there an equivalent machine which use below flags for building up binaries.
-march=armv6k -Wl,-z,max-page-size=0x10000,-z,common-page-size=0x10000,-Ttext-segment=0x10000
Thanks,
Abhinav
-----Original Message-----
From: Barros Pena, Belen [mailto:[email protected]]
Sent: Wednesday, October 21, 2015 18:13
To: Bipnesh, Abhinav (Abhinav); [email protected]
Subject: Re: [yocto] Meta layer for Cavium CNS3xxx ARM processor
Quoted 10 lines · Abhinav (Abhinav)
Hi,
I am looking for an meta layer which provide support for Cavium CNS3xxx SOC as need to build some application on that platform. Below is the output from the board when I check for the release and CPU information
$ cat /etc/*release MontaVista Linux 6, (.dev-snapshot-20130726)
Quoted 8 lines
$ cat /proc/cpuinfoProcessor : ARMv6-compatible processor rev 4 (v6l)BogoMIPS : 279.34Features : swp half thumb fastmult vfp edsp javaCPU implementer : 0x41CPU architecture: 7CPU variant : 0x0CPU part : 0xb02CPU revision : 4 Hardware : Cavium Networks CNS3420 Validation BoardRevision : 0000Serial : 0000000000000000So is there any meta layer which supports above SOC.
You can find out about such things in the layer index:
Make sure to select the correct branch on the left side of the menu.
Cheers
Belén
Quoted 4 lines
Thanks,
Abhinav
Abhinav,
Quoted 6 lines · Abhinav (Abhinav)
Hi,
I didn't find a match for Cavium CNS3412.
Is there an equivalent machine which use below flags for building up binaries.-march=armv6k -Wl,-z,max-page-size=0x10000,-z,common-page-size=0x10000,-Ttext-segment=0x10000
Not sure about those specific parameters but you may want to check meta-arago and meta-eldk, those to list armv6 support. Its a start.
- armin
Quoted 48 lines
Thanks,
Abhinav-----Original Message-----
From: Barros Pena, Belen [mailto:[email protected]]
Sent: Wednesday, October 21, 2015 18:13
To: Bipnesh, Abhinav (Abhinav); [email protected]
Subject: Re: [yocto] Meta layer for Cavium CNS3xxx ARM processorQuoted 10 lines · Abhinav (Abhinav)
Hi,
I am looking for an meta layer which provide support for Cavium CNS3xxx SOC as need to build some application on that platform. Below is the output from the board when I check for the release and CPU information
$ cat /etc/*release MontaVista Linux 6, (.dev-snapshot-20130726)Quoted 8 lines
$ cat /proc/cpuinfoProcessor : ARMv6-compatible processor rev 4 (v6l)BogoMIPS : 279.34Features : swp half thumb fastmult vfp edsp javaCPU implementer : 0x41CPU architecture: 7CPU variant : 0x0CPU part : 0xb02CPU revision : 4 Hardware : Cavium Networks CNS3420 Validation BoardRevision : 0000Serial : 0000000000000000So is there any meta layer which supports above SOC.
You can find out about such things in the layer index:
Make sure to select the correct branch on the left side of the menu.
Cheers
Belén
Quoted 4 lines
Thanks,
Abhinav