Skip to contentSkip to conversation

BMC health monitoring

DISCUSSION Vijay Khemka 2 participants 3 messages Apr 28, 2020 – Apr 29, 2020

lore
Share & tools
lore
#0 lore raw

Is there any module which does health monitoring for BMC health. If there is none then I am proposing a phosphor-bmc-health which will monitor following component to start with and can be extended for more components.

1. CPU utilization
2. Memory utilization

It will take proper action like report alert or reboot system when these data will cross it’s threshold value which was configured.

Regards
-Vijay

#1 lore raw

Hello Vijay,

I'm not aware of an BMC health monitoring package that is ready to use out of the box, but it appears we're thinking of similar things -- monitor the BMC health.
I guess there may be multiple parts to this:
1) How does the BMC collect health metrics; this may be similar to profiling a regular Linux system; actually the list of metrics may be expanded to anything that may be obtained through Linux profilers, but the set of metrics that are most important might vary in different situations.
2) How to get the metric data out of the BMC to the host or some monitoring entity that oversees a large number of machines; depending on the connectivity of the BMC it may use different methods.

Thanks,
Sui

Quoted 15 lines · Vijay Khemka

Is there any module which does health monitoring for BMC health. If there is none then I am proposing a phosphor-bmc-health which will monitor following component to start with and can be extended for more components.

CPU utilization
Memory utilization

It will take proper action like report alert or reboot system when these data will cross it’s threshold value which was configured.

Regards

-Vijay

#2 lore raw

On 4/28/20, 6:23 PM, "Sui Chen" <[email protected]> wrote:

Hello Vijay,

I'm not aware of an BMC health monitoring package that is ready to use out of the box, but it appears we're thinking of similar things -- monitor the BMC health.
I guess there may be multiple parts to this:
1) How does the BMC collect health metrics; this may be similar to profiling a regular Linux system; actually the list of metrics may be expanded to anything that may be obtained through Linux profilers, but the set of metrics that are most important might vary in different situations.
We can add all component of metrics to a dbus interface and frequency of Polling these data can be defined by config file as well as action.
2) How to get the metric data out of the BMC to the host or some monitoring entity that oversees a large number of machines; depending on the connectivity of the BMC it may use different methods.

Rest or redfish can take these data out of BMC via bmcweb.

    Thanks,
    Sui
    
    On Tue, Apr 28, 2020 at 1:19 PM Vijay Khemka <[email protected]> wrote:
    >
    > Is there any module which does health monitoring for BMC health. If there is none then I am proposing a phosphor-bmc-health which will monitor following component to start with and can be extended for more components.
    >
    > CPU utilization
    > Memory utilization
    >
    >
    >
    > It will take proper action like report alert or reboot system when these data will cross it’s threshold value which was configured.
    >
    >
    >
    > Regards
    >
    > -Vijay