Skip to contentSkip to conversation

cs46xx sound quality and CD volume

DISCUSSION Bob McElrath 2 participants 4 messages Oct 12, 2002 – Oct 13, 2002 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw
Quoted 9 lines · [email protected]…
Quoted 9 lines

However, one small buglet. When recording from line1 (aux in the current driver), the sound sometimes sounds very tinny and scratchy. I can fix this by muting/unmuting the CD and adjusting the CD volume. Yes, the CD slider in alsamixer. Not the Aux one or the Capture one or the DAC one. The CD one. Weird, huh? I've tried playing with all the other sliders and they do not affect the recording quality.

Quoted 5 lines

This is a known problem (at least forme). When you unmute the CD volume the soundcard amplifier is turned off, and at least for the Hercules Game Theater XP card
this makes no good.
This thing could be easily fixed.

Is the amplifier the IEC 958? (it now shows up in the mixer with the new DSP code)

So I'm using 0.90pre3 right now with the new DSP code, and it does something different-strange. When I first insert the module everything sounds great, but if I unmute the IEC958, I get a constant tone in my speakers (~3 kHz, I'm guessing) and anything which tries to play PCM audio just hangs.

It was not this way on bootup. I think the card got into some bad state. I tried inserting both the alsa and oss drivers to try to reset the card, but to no avail.

Also it seems like every mixer element is duplicated in alsamixer, but you probably know that.

Also I tried the SPDIF in with this new DSP code, and it doesn't seem to work. There is an 'Optical/Coaxial SPDIF Input' in alsamixer but I can't change its levels, only mute it.

And last thing, while the card is in this state, when I record I don't get the proper audio. It sounds like tick-tick-tick with a frequency of about 2 Hz.

Cheers,
-- Bob

Bob McElrath
Univ. of Wisconsin at Madison, Department of Physics

"The surest way to corrupt a youth is to instruct him to hold in higher esteem those who think alike than those who think differently."
-- Nietzsche

#2 lore raw
Quoted 9 lines

So I'm using 0.90pre3 right now with the new DSP code, and it does something different-strange. When I first insert the module everything sounds great, but if I unmute the IEC958, I get a constant tone in my speakers (~3 kHz, I'm guessing) and anything which tries to play PCM audio just hangs.

That is a problem not related to the "CD Volume" that should be fixed by now. The "~3 kHz sound" that you are talking about usually happen when the DSP hangs and it leaves some junk left in the HW FIFO.

I think you should try latest CVS.

/Benny

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#3 lore raw
In reply to Bob McElrath
Quoted 6 lines

Is the amplifier the IEC 958? (it now shows up in the mixer with the new DSP code)

That's not the amplifier, that's the SPDIF input/output control. On the Game Theater XP card the amplifier is always turned on (with the exception when unmute the CD volume). There is no mixer control for this.

Quoted 4 lines

Also it seems like every mixer element is duplicated in alsamixer, but you probably know that.

One is for the primary AC97 codec, and the other one for the secondary AC97 codec. The Game Theater XP got two cs4294 codecs. That's why many mixer control are duplicated, and probably some of them may be obsolete. Like microphone and headphone on the secondary codecs are not wired to anything.

Quoted 5 lines

Also I tried the SPDIF in with this new DSP code, and it doesn't seem to work. There is an 'Optical/Coaxial SPDIF Input' in alsamixer but I can't change its levels, only mute it.

With that control you selects to use Coaxial digital input or Optical digital input. Look on the back on your beutiful blue break-out box and you will find them -;)

/Benny

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

#4 lore raw
Quoted 5 lines · Benny Sjostrand [[email protected]] wrote:

That is a problem not related to the "CD Volume" that should be fixed by now. The "~3 kHz sound" that you are talking about usually happen when the DSP hangs and it leaves some junk left in the HW FIFO.

I think you should try latest CVS.

The latest CVS has the tick-tick-tick recording problem I mentioned earlier. No matter what I record, no matter what source, no matter what mixer settings, all I get is 'tick-tick-tick' in the right channel with a frequency of 2Hz. If I turn down the 'Capture' mixer setting the ticking becomes quieter, but it is not affected by any other mixer setting. (I get it with all inputs and outputs muted)

Haven't seen the CVS one do the 3kHz sound thing though.

Quoted 7 lines · Benny Sjostrand [[email protected]] wrote:
Quoted 3 lines

Is the amplifier the IEC 958? (it now shows up in the mixer with the new DSP code)

That's not the amplifier, that's the SPDIF input/output control. On the Game Theater XP card the amplifier is always turned on (with the exception when unmute the CD volume). There is no mixer control for this.

No? That seems odd...

Quoted 7 lines
Quoted 4 lines

Also I tried the SPDIF in with this new DSP code, and it doesn't seem to work. There is an 'Optical/Coaxial SPDIF Input' in alsamixer but I can't change its levels, only mute it.

With that control you selects to use Coaxial digital input or Optical digital input. Look on the back on your beutiful blue break-out box and you will find them -;)

I know where it is! ;) I'm saying nothing comes out of my speakers when I put an input there. (but the fault may be my input -- so ignore this complaint for now)

BTW, I tried opening /dev/dsp three times (simultaneously) and it beautifully plays all three! Neat!

Also, when trying to do full duplex record/play, the PCM output is affected by a couple of quick scratches on device open.

Cheers,
-- Bob

Bob McElrath
Univ. of Wisconsin at Madison, Department of Physics

"The surest way to corrupt a youth is to instruct him to hold in higher esteem those who think alike than those who think differently."
-- Nietzsche