Skip to contentSkip to conversation

3/11 Ext2/3 Updates: Extended attributes, ACL, etc.

PATCH New [email protected] 1 participant 1 message Oct 31, 2002 ext2 file system

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 3/11 Ext2/3 Updates: Extended attributes, ACL, etc.

Ext2/3 forward compatibility: inode size

This patch allows filesystems with expanded inodes to be mounted. (compatibility feature flags will be used to control whether or not the filesystem should be mounted in case the new inode fields will result in compatibility issues). This allows for future compatibility with newer versions of ext2fs.

 ext2/ext2.h   |    7 +++++++
 ext2/ialloc.c |    1 +
 ext2/inode.c  |    7 +++++++
 ext2/super.c  |    4 +++-
 ext3/inode.c  |   14 +++++---------
 ext3/super.c  |    4 +++-
 6 files changed, 26 insertions(+), 11 deletions(-)
fs/ext2/ext2.h +7 -0
diff -Nru a/fs/ext2/ext2.h b/fs/ext2/ext2.h
@@ -10,6 +10,7 @@
 	__u32	i_faddr;
 	__u8	i_frag_no;
 	__u8	i_frag_size;
+	__u16	i_state;
 	__u32	i_file_acl;
 	__u32	i_dir_acl;
 	__u32	i_dtime;
@@ -22,6 +23,12 @@
 	rwlock_t i_meta_lock;
 	struct inode	vfs_inode;
 };
+
+/*
+ * Inode dynamic state flags
+ */
+#define EXT2_STATE_NEW			0x00000001 /* inode is newly created */
+
 
 /*
  * Function prototypes
fs/ext2/ialloc.c +1 -0
diff -Nru a/fs/ext2/ialloc.c b/fs/ext2/ialloc.c
@@ -386,6 +386,7 @@
 	ei->i_prealloc_block = 0;
 	ei->i_prealloc_count = 0;
 	ei->i_dir_start_lookup = 0;
+	ei->i_state = EXT2_STATE_NEW;
 	if (ei->i_flags & EXT2_SYNC_FL)
 		inode->i_flags |= S_SYNC;
 	if (ei->i_flags & EXT2_DIRSYNC_FL)
fs/ext2/inode.c +7 -0
diff -Nru a/fs/ext2/inode.c b/fs/ext2/inode.c
@@ -1012,6 +1012,7 @@
 		ei->i_dir_acl = le32_to_cpu(raw_inode->i_dir_acl);
 	ei->i_dtime = 0;
 	inode->i_generation = le32_to_cpu(raw_inode->i_generation);
+	ei->i_state = 0;
 	ei->i_next_alloc_block = 0;
 	ei->i_next_alloc_goal = 0;
 	ei->i_prealloc_count = 0;
@@ -1076,6 +1077,11 @@
 	if (IS_ERR(raw_inode))
  		return -EIO;
 
+	/* For fields not not tracking in the in-memory inode,
+	 * initialise them to zero for new inodes. */
+	if (ei->i_state & EXT2_STATE_NEW)
+		memset(raw_inode, 0, EXT2_SB(sb)->s_inode_size);
+
 	if (ino == EXT2_ACL_IDX_INO || ino == EXT2_ACL_DATA_INO) {
 		ext2_error (sb, "ext2_write_inode", "bad inode number: %lu",
 			    (unsigned long) ino);
@@ -1152,6 +1158,7 @@
 			err = -EIO;
 		}
 	}
+	ei->i_state &= ~EXT2_STATE_NEW;
 	brelse (bh);
 	return err;
 }
fs/ext2/super.c +3 -1
diff -Nru a/fs/ext2/super.c b/fs/ext2/super.c
@@ -630,7 +630,9 @@
 	} else {
 		sbi->s_inode_size = le16_to_cpu(es->s_inode_size);
 		sbi->s_first_ino = le32_to_cpu(es->s_first_ino);
-		if (sbi->s_inode_size != EXT2_GOOD_OLD_INODE_SIZE) {
+		if ((sbi->s_inode_size < EXT2_GOOD_OLD_INODE_SIZE) ||
+		    (sbi->s_inode_size & (sbi->s_inode_size - 1)) ||
+		    (sbi->s_inode_size > blocksize)) {
 			printk ("EXT2-fs: unsupported inode size: %d\n",
 				sbi->s_inode_size);
 			goto failed_mount;
fs/ext3/inode.c +5 -9
diff -Nru a/fs/ext3/inode.c b/fs/ext3/inode.c
@@ -2325,6 +2325,11 @@
 		if (err)
 			goto out_brelse;
 	}
+	/* For fields not not tracking in the in-memory inode,
+	 * initialise them to zero for new inodes. */
+	if (ei->i_state & EXT3_STATE_NEW)
+		memset(raw_inode, 0, EXT3_SB(inode->i_sb)->s_inode_size);
+
 	raw_inode->i_mode = cpu_to_le16(inode->i_mode);
 	if(!(test_opt(inode->i_sb, NO_UID32))) {
 		raw_inode->i_uid_low = cpu_to_le16(low_16_bits(inode->i_uid));
@@ -2362,15 +2367,6 @@
 	raw_inode->i_faddr = cpu_to_le32(ei->i_faddr);
 	raw_inode->i_frag = ei->i_frag_no;
 	raw_inode->i_fsize = ei->i_frag_size;
-#else
-	/* If we are not tracking these fields in the in-memory inode,
-	 * then preserve them on disk, but still initialise them to zero
-	 * for new inodes. */
-	if (ei->i_state & EXT3_STATE_NEW) {
-		raw_inode->i_faddr = 0;
-		raw_inode->i_frag = 0;
-		raw_inode->i_fsize = 0;
-	}
 #endif
 	raw_inode->i_file_acl = cpu_to_le32(ei->i_file_acl);
 	if (!S_ISREG(inode->i_mode)) {
fs/ext3/super.c +3 -1
diff -Nru a/fs/ext3/super.c b/fs/ext3/super.c
@@ -1109,7 +1109,9 @@
 	} else {
 		sbi->s_inode_size = le16_to_cpu(es->s_inode_size);
 		sbi->s_first_ino = le32_to_cpu(es->s_first_ino);
-		if (sbi->s_inode_size != EXT3_GOOD_OLD_INODE_SIZE) {
+		if ((sbi->s_inode_size < EXT3_GOOD_OLD_INODE_SIZE) ||
+		    (sbi->s_inode_size & (sbi->s_inode_size - 1)) ||
+		    (sbi->s_inode_size > blocksize)) {
 			printk (KERN_ERR
 				"EXT3-fs: unsupported inode size: %d\n",
 				sbi->s_inode_size);