Broadcom Gigabit 5703 and Bridging

Greetings,

I'm seeing 'TCP Checksum' Errors after packets pass through a host bridging TCP packets with:

- Kernel 2.4.20
- Bridge code
- tg3 (Broadcom Gigabit 5703)

eth0: Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)]

    (PCIX:100MHz:64-bit) 10/100/1000BaseT

(eth1 is similar)

Pings (ICMP) pass through the bridge just fine.

The hardware is IBM's xSeries 305.

Paul
--
Paul Schulz - Software Engineer [codito, ergo sum]
Foursticks Pty Ltd - 2/259 Glen Osmond Road, Frewville, SA 5063
Phone: +61 8 8338 5500 Fax: +61 8 8338 5511 Mobile: +61 401 981 301
Email: [email protected] Web: www.foursticks.com