Skip to contentSkip to conversation

hdsp multiface pci.

DISCUSSION [email protected] 1 participant 1 message Jan 20, 2003

lore
Share & tools
lore
#0 lore raw

Roger,
I'm in the office right now, so I'll pop home at noon PST and happily try
out things.

Yesterday the only thing were you seemed to differ with me on my description
of things was how Alsa_pcm:playback signals got to the physical outputs. I said they were hooked up automatically, by the driver. I think you felt otherwise. Possibly that is part of this problem I'm having?

My test setup was pretty simple. I started alsaplayer and qjackconnect so
that I could see how things were hooked up. Standard default hookup takes alsaplayer audio and sends it to playback_1/2. This goes out through ADAT-1, channels 1 & 2, and to a PowerPlay Pro headphone amp. My headphones are plugged in there.

With a CD in the drive I can hear sound through my headphones.

At this point I believe that Alsa_pcm:playback_1/2 are hooked to physical
outputs 1/2 since I get sound.

I then run (from my sleepy memory)

amixer cset numid=5 26,0,300
amixer cset numid=5 27,1,300

to reduce volume, but it doesn't. No values in the '300' position seemed to do anything.

For clarification, what I thought I was doing with the above command was
taking playback_1/2 (26,27) and routing them through the mixer to physical I/O's 0&1. If the numbering is wrong, that set of commands could certainly be incorrect. (Or I'm still just not understanding things and plain mixed up.)

Thinking about it this morning though, it seems to me that possibly the
default routing of audio doesn't go through the mixer at all? If this is the case, then maybe I need to break whatever the default conection is before I can hear the effects of the mixer? Is this the purpose of your script below?

Let me know where you think I'm going wrong.

Thanks!
Mark

Quoted 36 lines

Hi, Mark --

Quoted 3 lines

When I tried some amixer commands I was disappointed to find that they do nothing at all on my machine. No command I tried seems to control volume to my headphones or speakers at all.

Could you briefly explain your test setup and what amixer commands you've been generating? I'm surprised that the ALSA driver seems to work, yet amixer doesn't.

Are you setting the "line_outs_monitor" parameter in /etc/modules.conf? (You shouldn't.)

When you try to zero all of the mixer routes, does it have any effect? Perhaps the channels are mapped differently than we think. This script will try to zero all 1352 channels for you:

#!/bin/bash

ADAT1="0 1 2 3 4 5 6 7"
ADAT2="8 9 10 11 12 13 14 15"
ADAT3="16 17 18 19 20 21 22 23"
SPDIF="24 25"

function disconnect () {
    for output in "$@"; do
        input=0
	while [ $input -le 25 ]; do
	    echo -n "."
	    amixer cset numid=5 $input,$output,0 > /dev/null
            input=$((input+1))
	done
    done
    echo
}
Quoted 13 lines

echo -n "Disconnecting ADAT1 outputs"
disconnect $ADAT1
echo -n "Disconnecting ADAT2 outputs"
disconnect $ADAT2
echo -n "Disconnecting ADAT3 outputs"
disconnect $ADAT3
echo -n "Disconnecting SPDIF output"
disconnect $SPDIF

Signature · 3 lines
Roger Williams <[email protected]>
Qux Tool & Die, Middleborough, Massachusetts
// Omne tulit punctum qui misquit utile dulci //

-------------------------------------------------------
This SF.NET email is sponsored by: FREE SSL Guide from Thawte are you planning your Web Server Security? Click here to get a FREE Thawte SSL guide and find the answers to all your SSL security issues.
http://ads.sourceforge.net/cgi-bin/redirect.pl?thaw0026en