Skip to contentSkip to conversation

PATCH: kill more ioregs, add OUTBSYNC

PATCH Alan Cox 2 participants 3 messages Feb 18, 2003 – Feb 19, 2003

lore
Share & tools
lore

Alan Cox

author
#0 lore raw
include/linux/ide.h +15 -22
diff -u --new-file --recursive --exclude-from /usr/src/exclude linux-2.5.61/include/linux/ide.h linux-2.5.61-ac2/include/linux/ide.h
@@ -894,9 +885,9 @@
 	char name[6];			/* name of interface, eg. "ide0" */
 
 		/* task file registers for pata and sata */
-	ide_ioreg_t	io_ports[IDE_NR_PORTS];
-	sata_ioreg_t	sata_scr[SATA_NR_PORTS];
-	sata_ioreg_t	sata_misc[SATA_NR_PORTS];
+	unsigned long	io_ports[IDE_NR_PORTS];
+	unsigned long	sata_scr[SATA_NR_PORTS];
+	unsigned long	sata_misc[SATA_NR_PORTS];
 
 	hw_regs_t	hw;		/* Hardware info */
 	ide_drive_t	drives[MAX_DRIVES];	/* drive info */
@@ -960,9 +951,6 @@
 	void (*atapi_output_bytes)(ide_drive_t *, void *, u32);
 #endif
 
-#if 0
-	ide_dma_ops_t	*dmaops;
-#else
 	int (*ide_dma_read)(ide_drive_t *drive);
 	int (*ide_dma_write)(ide_drive_t *drive);
 	int (*ide_dma_begin)(ide_drive_t *drive);
@@ -988,23 +976,19 @@
 	ide_startstop_t (*ide_dma_queued_read)(ide_drive_t *drive);
 	ide_startstop_t (*ide_dma_queued_write)(ide_drive_t *drive);
 	ide_startstop_t (*ide_dma_queued_start)(ide_drive_t *drive);
-#endif
 
-#if 0
-	ide_io_ops_t	*iops;
-#else
-	void (*OUTB)(u8 addr, ide_ioreg_t port);
-	void (*OUTW)(u16 addr, ide_ioreg_t port);
-	void (*OUTL)(u32 addr, ide_ioreg_t port);
-	void (*OUTSW)(ide_ioreg_t port, void *addr, u32 count);
-	void (*OUTSL)(ide_ioreg_t port, void *addr, u32 count);
-
-	u8  (*INB)(ide_ioreg_t port);
-	u16 (*INW)(ide_ioreg_t port);
-	u32 (*INL)(ide_ioreg_t port);
-	void (*INSW)(ide_ioreg_t port, void *addr, u32 count);
-	void (*INSL)(ide_ioreg_t port, void *addr, u32 count);
-#endif
+	void (*OUTB)(u8 addr, unsigned long port);
+	void (*OUTBSYNC)(u8 addr, unsigned long port);
+	void (*OUTW)(u16 addr, unsigned long port);
+	void (*OUTL)(u32 addr, unsigned long port);
+	void (*OUTSW)(unsigned long port, void *addr, u32 count);
+	void (*OUTSL)(unsigned long port, void *addr, u32 count);
+
+	u8  (*INB)(unsigned long port);
+	u16 (*INW)(unsigned long port);
+	u32 (*INL)(unsigned long port);
+	void (*INSW)(unsigned long port, void *addr, u32 count);
+	void (*INSL)(unsigned long port, void *addr, u32 count);
 
 	/* dma physical region descriptor table (cpu view) */
 	unsigned int	*dmatable_cpu;
#1 lore raw

include/linux/ide.h line 981

Quoted 1 line · Alan Cox
include/linux/ide.h +1 -0
+	void (*OUTBSYNC)(u8 addr, unsigned long port);

This is the version without the drive parameter... This is on purpose ?

Regards,
Ben.

author
#2 lore raw
Quoted 6 lines · Benjamin Herrenschmidt

include/linux/ide.h line 981

Quoted 1 line · Alan Cox
include/linux/ide.h +1 -0
+	void (*OUTBSYNC)(u8 addr, unsigned long port);

This is the version without the drive parameter... This is on purpose ?

Im resynching where I am that works right on 2.4 before I feed Linus wildly untested stuff. This may turn into enough fun as it is. Your PPC changes are on the pile for the next round of fun, and the stuff that has been tested like the spin up wait are in.