Skip to contentSkip to conversation

Envy24-VT1712 interleaved channels.

DISCUSSION Glen Gee 2 participants 2 messages Apr 25, 2003 1 message not in the archive

lore
Share & tools
lore

Glen Gee

author
#1 lore raw
In reply to a message not in the archive

Hi Jaroslav,

We intend to use the Envy24-1712 chip to perform A/D conversion for the input capture channels. Of the 0-7 analog input channels we want to make them stereo pairs and thus end up with 4 input stereo channels. The channels must be independant...meaning no mixing..orginal analog data must be preserved in digital form. The digital data will be streamed over ethernet and thus latency is an issue as well. All channels must perform A/D activity at the same time. At this point we are trying to figure out if the alsa driver supports this...or if you can advise us on how to accomplish this.

Thanks.

Quoted 10 lines

All input lines are captured at once in interleaved sample frames.
There is 12 capture channels. Hardware vendors usually connects 0-7
channels as analog, 8-9 as S/PDIF and 10-11 is the digital stereo mixer
which contains result of playback and captured channels controlled with
a matrix mixer.

Quoted 9 lines

Jaroslav

-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project, SuSE Labs

__________________________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo
http://search.yahoo.com

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven.
http://thinkgeek.com/sf

#2 lore raw
Quoted 14 lines · Glen Gee

Hi Jaroslav,

We intend to use the Envy24-1712 chip to perform A/D conversion for the input capture channels. Of the 0-7 analog input channels we want to make them stereo pairs and thus end up with 4 input stereo channels. The channels must be independant...meaning no mixing..orginal analog data must be preserved in digital form. The digital data will be streamed over ethernet and thus latency is an issue as well. All channels must perform A/D activity at the same time. At this point we are trying to figure out if the alsa driver supports this...or if you can advise us on how to accomplish this.

ALSA supports this possibility. You can grab all 12 channels at same time and do something with these samples in your software.

Jaroslav

-----
Jaroslav Kysela <[email protected]>
Linux Kernel Sound Maintainer
ALSA Project, SuSE Labs

-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf