Skip to contentSkip to conversation

microcode, devfs: Wrong interface change in 2.4.25

DISCUSSION Giacomo A. Catenazzi 2 participants 4 messages Feb 23, 2004 – Feb 24, 2004 3 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): E1Auyi3-0000Up-00@dbz

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#3 lore raw

Hello!

From the 2.4.25, devfs doesn't create anymore the microcode device in /dev/cpu/microcode (as expected from in devices.txt and LANANA) but in /dev/misc/microcode. The /dev/cpu/microcode path is also hardcoded also in microcode_ctl and distributions create only /dev/cpu/microcode.

So last microcode patch (in 2.4.25) is wrong.
You should add again the /dev/cpu/microcode support in devfs, so that the normal and stable interface is maintained (in stable kernel serie)

ciao
giacomo

Quoted 22 lines · Ryan Underwood
Quoted 6 lines · Giacomo A. Catenazzi
Quoted 3 lines

What I meant is that the name "/dev/misc/microcode" must be used instead of "/dev/cpu/microcode", because the microcode driver in 2.4.25 no longer registers with devfs.

I don't undestand.
Do you say that devfs will register only /dev/misc/microcode ?

No, the microcode driver only registers with misc.

Quoted 4 lines

So if devfs will register misc/microcode, it is probably a kernel bug (interface should not change!) or a problem with LANANA (in this case I should change misc microcode in drivers, but after an update to 'makedev' package.

Examine microcode.c driver diff between 2.4.23 and 2.4.25 in the init function. The removed code is obvious.

#4 lore raw

Hi Giacomo,

Thank you. Leave it with me and I'll verify what's going on in the 2.4.25 version thereof and correct it.

Kind regards
Tigran

Quoted 43 lines · Giacomo A. Catenazzi

Hello!

From the 2.4.25, devfs doesn't create anymore the microcode
device in /dev/cpu/microcode (as expected from in devices.txt and LANANA) but in /dev/misc/microcode. The /dev/cpu/microcode path is also hardcoded also in microcode_ctl and distributions create only /dev/cpu/microcode.

So last microcode patch (in 2.4.25) is wrong.
You should add again the /dev/cpu/microcode support in devfs, so that the normal and stable interface is maintained (in stable kernel serie)

ciao
giacomo

Quoted 22 lines · Ryan Underwood
Quoted 6 lines · Giacomo A. Catenazzi
Quoted 3 lines

What I meant is that the name "/dev/misc/microcode" must be used instead of "/dev/cpu/microcode", because the microcode driver in 2.4.25 no longer registers with devfs.

I don't undestand.
Do you say that devfs will register only /dev/misc/microcode ?

No, the microcode driver only registers with misc.

Quoted 4 lines

So if devfs will register misc/microcode, it is probably a kernel bug (interface should not change!) or a problem with LANANA (in this case I should change misc microcode in drivers, but after an update to 'makedev' package.

Examine microcode.c driver diff between 2.4.23 and 2.4.25 in the init function. The removed code is obvious.

#5 lore raw

[patch-2.4.25] microcode.c fix (wasRe: microcode, devfs: Wrong interface change in 2.4.25

Hi Giacomo,

Yes, you are right. I have now looked at the driver in 2.4.25 and see that the latest change did break the compatibility inadvertently (because of wrongly backporting the changes from 2.6 --- can't remember who did it now, but it doesn't matter).

Please test the attached patch. I have tested it on 2.4.25 but only without devfs compiled into the kernel.

Kind regards
Tigran

PS.Notice that I also added your earlier suggestion to do compile-time merging of strings instead of runtime.

arch/i386/kernel/microcode.c +26 -11
@@ -1,7 +1,7 @@
 /*
  *	Intel CPU Microcode Update driver for Linux
  *
- *	Copyright (C) 2000 Tigran Aivazian
+ *	Copyright (C) 2000-2004 Tigran Aivazian
  *
  *	This driver allows to upgrade microcode on Intel processors
  *	belonging to IA-32 family - PentiumPro, Pentium II,
@@ -64,6 +64,10 @@
  *		Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl
  *		because we no longer hold a copy of applied microcode
  *		in kernel memory.
+ *	1.14	23 Feb 2004 Tigran Aivazian <[email protected]>
+ *		Restored devfs regular file entry point which was
+ *		accidentally removed when back-porting changes from the 2.6
+ *		version of the driver.
  */
 
 
@@ -73,6 +77,7 @@
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/miscdevice.h>
+#include <linux/devfs_fs_kernel.h>
 #include <linux/spinlock.h>
 #include <linux/mm.h>
 
@@ -84,8 +89,8 @@
 MODULE_AUTHOR("Tigran Aivazian <[email protected]>");
 MODULE_LICENSE("GPL");
 
-#define MICROCODE_VERSION 	"1.13"
-#define MICRO_DEBUG 		1
+#define MICROCODE_VERSION 	"1.14"
+#define MICRO_DEBUG 		0
 #if MICRO_DEBUG
 #define dprintk(x...) printk(KERN_INFO x)
 #else
@@ -470,6 +475,7 @@
 	return -EINVAL;
 }
 
+/* shared between misc device and devfs regular file */
 static struct file_operations microcode_fops = {
 	.owner		= THIS_MODULE,
 	.write		= microcode_write,
@@ -483,29 +489,38 @@
 	.fops		= &microcode_fops,
 };
 
+static devfs_handle_t devfs_handle;
+
 static int __init microcode_init (void)
 {
 	int error;
 
 	error = misc_register(&microcode_dev);
-	if (error) {
+	if (error)
 		printk(KERN_ERR
 			"microcode: can't misc_register on minor=%d\n",
 			MICROCODE_MINOR);
-		return error;
+	devfs_handle = devfs_register(NULL, "cpu/microcode",
+			DEVFS_FL_DEFAULT, 0, 0, S_IFREG | S_IRUSR | S_IWUSR,
+			&microcode_fops, NULL);
+	if (devfs_handle == NULL && error) {
+		printk(KERN_ERR "microcode: failed to devfs_register()\n");
+		goto out;
 	}
-
+	error = 0;
 	printk(KERN_INFO
-		"IA-32 Microcode Update Driver: v%s <[email protected]>\n",
-		MICROCODE_VERSION);
-	return 0;
+		"IA-32 Microcode Update Driver: v"
+		MICROCODE_VERSION " <[email protected]>\n");
+out:
+	return error;
 }
 
 static void __exit microcode_exit (void)
 {
 	misc_deregister(&microcode_dev);
-	printk(KERN_INFO "IA-32 Microcode Update Driver v%s unregistered\n",
-			MICROCODE_VERSION);
+	devfs_unregister(devfs_handle);
+	printk(KERN_INFO "IA-32 Microcode Update Driver v"
+		MICROCODE_VERSION " unregistered\n");
 }
 
 module_init(microcode_init)
#6 lore raw

Re: [patch-2.4.25] microcode.c fix (wasRe: microcode, devfs: Wrong interface change in 2.4.25

Quoted 9 lines · Tigran Aivazian

Hi Giacomo,

Yes, you are right. I have now looked at the driver in 2.4.25 and see that the latest change did break the compatibility inadvertently (because of wrongly backporting the changes from 2.6 --- can't remember who did it now, but it doesn't matter).

Please test the attached patch. I have tested it on 2.4.25 but only without devfs compiled into the kernel.

The patch is correct. Now devfs will create the devices in /dev/cpu/microcode (and in /dev/misc).

[Yesterday I had some space problem with your patch, but I think the problem was in my MUA]

thanks!

ciao
giacomo

Quoted 104 lines

Kind regards
Tigran

PS.Notice that I also added your earlier suggestion to do compile-time merging of strings instead of runtime.

arch/i386/kernel/microcode.c +26 -11
@@ -1,7 +1,7 @@
 /*
  *	Intel CPU Microcode Update driver for Linux
  *
- *	Copyright (C) 2000 Tigran Aivazian
+ *	Copyright (C) 2000-2004 Tigran Aivazian
  *
  *	This driver allows to upgrade microcode on Intel processors
  *	belonging to IA-32 family - PentiumPro, Pentium II,
@@ -64,6 +64,10 @@
  *		Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl
  *		because we no longer hold a copy of applied microcode
  *		in kernel memory.
+ *	1.14	23 Feb 2004 Tigran Aivazian <[email protected]>
+ *		Restored devfs regular file entry point which was
+ *		accidentally removed when back-porting changes from the 2.6
+ *		version of the driver.
  */
 
 
@@ -73,6 +77,7 @@
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 #include <linux/miscdevice.h>
+#include <linux/devfs_fs_kernel.h>
 #include <linux/spinlock.h>
 #include <linux/mm.h>
 
@@ -84,8 +89,8 @@
 MODULE_AUTHOR("Tigran Aivazian <[email protected]>");
 MODULE_LICENSE("GPL");
 
-#define MICROCODE_VERSION 	"1.13"
-#define MICRO_DEBUG 		1
+#define MICROCODE_VERSION 	"1.14"
+#define MICRO_DEBUG 		0
 #if MICRO_DEBUG
 #define dprintk(x...) printk(KERN_INFO x)
 #else
@@ -470,6 +475,7 @@
 	return -EINVAL;
 }
 
+/* shared between misc device and devfs regular file */
 static struct file_operations microcode_fops = {
 	.owner		= THIS_MODULE,
 	.write		= microcode_write,
@@ -483,29 +489,38 @@
 	.fops		= &microcode_fops,
 };
 
+static devfs_handle_t devfs_handle;
+
 static int __init microcode_init (void)
 {
 	int error;
 
 	error = misc_register(&microcode_dev);
-	if (error) {
+	if (error)
 		printk(KERN_ERR
 			"microcode: can't misc_register on minor=%d\n",
 			MICROCODE_MINOR);
-		return error;
+	devfs_handle = devfs_register(NULL, "cpu/microcode",
+			DEVFS_FL_DEFAULT, 0, 0, S_IFREG | S_IRUSR | S_IWUSR,
+			&microcode_fops, NULL);
+	if (devfs_handle == NULL && error) {
+		printk(KERN_ERR "microcode: failed to devfs_register()\n");
+		goto out;
 	}
-
+	error = 0;
 	printk(KERN_INFO
-		"IA-32 Microcode Update Driver: v%s <[email protected]>\n",
-		MICROCODE_VERSION);
-	return 0;
+		"IA-32 Microcode Update Driver: v"
+		MICROCODE_VERSION " <[email protected]>\n");
+out:
+	return error;
 }
 
 static void __exit microcode_exit (void)
 {
 	misc_deregister(&microcode_dev);
-	printk(KERN_INFO "IA-32 Microcode Update Driver v%s unregistered\n",
-			MICROCODE_VERSION);
+	devfs_unregister(devfs_handle);
+	printk(KERN_INFO "IA-32 Microcode Update Driver v"
+		MICROCODE_VERSION " unregistered\n");
 }
 
 module_init(microcode_init)