Skip to contentSkip to conversation

USB oops on Thinkpad

DISCUSSION Anton Empl 1 participant 1 message Mar 17, 2004

lore
Share & tools
lore

Anton Empl

author
#0 lore raw

Hi,

this is not to complain but rather to report and try to sort out a problem experienced with the 2.6.x kernel for quite a long time. I am not a kernel expert so please forgive any not helpful statements here. Also, the hardware used is a Thinkpad T30 (2366-96U) laptop and all might just be specific to that system.

Since this system only has USB1 available internally I purchased a PCMCIA USB2 hub (ATEN USB 2.0 2 Port Host Control Card: PU-212). Inserting this card into a running kernel about every other time locks up the system. The lockup is more likely if the card is inserted longer after system start. Here's a transcript (by hand) of the oops:

  *pde=    00000000
  Oops:    0002 [#1]
  CPU:     0
  EIP:     0060: [<f8a079e9>] Not tainted
  EFLAGS:  00010296

EIP is at end_unlink_async+0x1a/0xf6 [ehci_hcd]

Process usb.agent

  Call trace:    ehci_work
                 ehci_irq
                 usb_hcd_irq
                 handle_IRQ_event
                 do_IRQ
                 common_interrupt

kernel panic: fatal exception in interrupt
In interrupt handler - not syncing

I can certainly provide more information but the problems described above are rather independent of the actual details of building the kernel and rather stable. Please cc since I am not subscribed to the list.

thanks,

[email protected]