Skip to contentSkip to conversation

When exactly should I worry?

DISCUSSION Bryce as root 2 participants 3 messages Sep 3, 2004 – Sep 4, 2004

lore
Share & tools
lore
#0 lore raw

Linux ZenIV.linux.org.uk 2.6.7-1.494.2.2smp #1 SMP Tue Aug 3 09:59:49 EDT 2004 i686 i686 i386 GNU/Linux

My system logs are filled with
"Losing some ticks... checking if CPU frequency changed."

prior to this (~15 days), there was none of this in the logs

Kernel messages that might be of relevance. (in no real order) Using tsc for high-res timesource
CPU0: Thermal monitoring enabled
CPU1: Thermal monitoring enabled
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not co
nnected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 3014.0031 MHz.
..... host bus clock speed is 200.0935 MHz.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs

There are no kernel messages ahout HPET or PIT. lmsensors seem to indicate the CPU is stable at 41degC (IF I can trust lmsensors)

Now then...
how much should /I/ panic or what else should I have included?

Phil
=--=

#1 lore raw
Quoted 1 line · Bryce as root

Linux ZenIV.linux.org.uk 2.6.7-1.494.2.2smp #1 SMP Tue Aug 3 09:59:49 EDT 2004 i686 i686 i386 GNU/Linux

Is this one of Alan's VIA C3 toys ?
If so, the longhaul driver was seriously horked between 2.6.5 and 2.6.9rc1.
I fixed that up a week or two ago. If you're stuck on that
kernel for whatever reason, just kill the longhaul.ko module.

Dave

#2 lore raw
In reply to Bryce as root
Quoted 26 lines · Bryce as root

Linux ZenIV.linux.org.uk 2.6.7-1.494.2.2smp #1 SMP Tue Aug 3 09:59:49 EDT 2004 i686 i686 i386 GNU/Linux

My system logs are filled with
"Losing some ticks... checking if CPU frequency changed."

prior to this (~15 days), there was none of this in the logs

Kernel messages that might be of relevance. (in no real order) Using tsc for high-res timesource
CPU0: Thermal monitoring enabled
CPU1: Thermal monitoring enabled
ENABLING IO-APIC IRQs
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not co
nnected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 3014.0031 MHz.
..... host bus clock speed is 200.0935 MHz.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs

Quoted 2 lines

There are no kernel messages ahout HPET or PIT. lmsensors seem to indicate the CPU is stable at 41degC

Duh, 3GHz SMP, I doubt very much its a VIA c3, ignore last email. 8-) I'll change my guess to dual P4. I'm surprised that any of the cpufreq drivers do anything on desktop p4's (other than p4-clockmod which still does comparatively little). My cloudy 'not quite firing on all cylinders at 3am' memory is recalling some patches that would prevent triggering these messages not so long ago, but I'm fairly certain they should've been in that Fedora kernel you're running. Most odd.

Can you paste the whole dmesg please?

Dave