Skip to contentSkip to conversation

serial/mcfserial: replace schedule_timeout() with msleep_interruptible()

PATCH Applied [email protected] 2 participants 2 messages Oct 30, 2004 – Nov 1, 2004

lore
Share & tools
lore
#0 lore raw

PATCH 6/8 serial/mcfserial: replace schedule_timeout() with msleep_interruptible()

Any comments would be appreciated.

Description: Use msleep_interruptible() instead of schedule_timeout() to guarantee the task delays as expected. Use set_current_state() instead of direct assignment of current->state.

---

 linux-2.6.10-rc1-max/drivers/serial/mcfserial.c |    9 ++++-----
 1 files changed, 4 insertions(+), 5 deletions(-)
drivers/serial/mcfserial.c renamed from drivers/serial/mcfserial.c~msleep_interruptible-drivers_serial_mcfserial +4 -5
diff -puN drivers/serial/mcfserial.c~msleep_interruptible-drivers_serial_mcfserial drivers/serial/mcfserial.c
@@ -35,6 +35,7 @@
 #include <linux/console.h>
 #include <linux/init.h>
 #include <linux/bitops.h>
+#include <linux/delay.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -978,7 +979,7 @@ static void send_break(	struct mcf_seria
 
 	if (!info->addr)
 		return;
-	current->state = TASK_INTERRUPTIBLE;
+	set_current_state(TASK_INTERRUPTIBLE);
 	uartp = info->addr;
 
 	local_irq_save(flags);
@@ -1230,8 +1231,7 @@ static void mcfrs_close(struct tty_struc
 #endif	
 	if (info->blocked_open) {
 		if (info->close_delay) {
-			current->state = TASK_INTERRUPTIBLE;
-			schedule_timeout(info->close_delay);
+			msleep_interruptible(jiffies_to_msecs(info->close_delay));
 		}
 		wake_up_interruptible(&info->open_wait);
 	}
@@ -1296,8 +1296,7 @@ mcfrs_wait_until_sent(struct tty_struct 
 			fifo_cnt++;
 		if (fifo_cnt == 0)
 			break;
-		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(char_time);
+		msleep_interruptible(jiffies_to_msecs(char_time));
 		if (signal_pending(current))
 			break;
 		if (timeout && time_after(jiffies, orig_jiffies + timeout))

_

Applied
#1 lore raw
Quoted 1 line · On Sun, Oct 31, 2004 at 12:47:16AM +0200, [email protected] wrote:

Any comments would be appreciated.

Applied.

Signature · 4 lines
Russell King
 Linux kernel    2.6 ARM Linux   - http://www.arm.linux.org.uk/
 maintainer of:  2.6 PCMCIA      - http://pcmcia.arm.linux.org.uk/
                 2.6 Serial core