Skip to contentSkip to conversation

2.6.10-rc2 on VAIO laptop and PowerMac 8500/G3

DISCUSSION John Mock 2 participants 2 messages Nov 19, 2004

lore
Share & tools
lore

John Mock

author
#0 lore raw

Thank you very much for the quick response on the PowerPC issues!!

Quoted 7 lines

You lack CONFIG_FRAMEBUFFER_CONSOLE maybe ? You should use the pmac_defconfig ... Now, if controlfb still doesn't work, then I'll have to dig out my old 8500, it's possible that the recent changes to the fbdev layer broke some of those old drivers.

As for serial, check out CONFIG_SERIAL_PMACZILOG and CONFIG_SERIAL_PMACZILOG_CONSOLE.

Rats! I was hoping you'd suggest a CONFIG_... i'd missed for either issue. As far as the video problem is concerned, i copied the '.config' from 2.6.8 to 2.6.9-rc1, and the resultant Linux works on 2.6.8 but 2.6.9-rc1 fails.

I do have both of the PMACZILOG switches set (see previously attached '.config' if there's anything else worth checking for), and if i run 'gtkterm' on both machines, the keyboard of one appears in the terminal window of the other. While the serial console on the laptop (Intel) will
appear in the Mac screen, the reverse does not work. The Linux command
line is:

       root=/dev/md0 md=0,/dev/sda7,/dev/sdb7,/dev/sdc7 md=1,/dev/sda8,/dev/sdb8,/dev/sdc8,console=ttyS0,9600 console=tty0

Note this doesn't seem to work under 2.4.27, with

CONFIG_MAC_SERIAL=y
CONFIG_SERIAL_CONSOLE=y

Is the Mac side fussy about CTS/RTS? I didn't make all of the adapters myself, so i can't be absolutely certain that all three modem control lines are propagated properly.

If there's anything i can try which will save you the trouble of digging out your Old World Mac, please do let me know!

Quoted 5 lines

Yes, that is due to the 2.6 changes in fbdev/fbcon, the loss of the per VT mode data structure, the driver is now sort-of supposed to re-invent a mode based on bogus stuff sent by fbcon on console switch. I don't like it much, but I suppose I'll have to fix controlfb (and platinumfb etc...).

If you might be so kind as to tell me which function and/or file that the video mode is being resynthesized in, then i can probably come with some kind of work-around. Then you can feel like you can fix this issue when it's convenient to do so. I looked for this once before but bogged down before i got anywhere.

				     -- JM
#1 lore raw
Quoted 6 lines · John Mock

If you might be so kind as to tell me which function and/or file that the video mode is being resynthesized in, then i can probably come with some kind of work-around. Then you can feel like you can fix this issue when it's convenient to do so. I looked for this once before but bogged down before i got anywhere.

drivers/video/controlfb, function is controlfb_set_par()

Ben.