Skip to contentSkip to conversation

Initialise pci_dev->irq correctly

PATCH In review Matthew Wilcox 1 participant 1 message Nov 22, 2005 PCI

lore
Share & tools
lore
#0 lore raw

PATCH 4/5 Initialise pci_dev->irq correctly

If the Interrupt Pin is 0, initialise the device's irq to NO_IRQ instead of leaving it unset.

---

 drivers/pci/probe.c |    7 +++++--
 1 files changed, 5 insertions(+), 2 deletions(-)

applies-to: 3175f6d926ef8ff55ee1fd96364d5b3ed430fb38 4ec4e15bcdd7401cf1fb19ef1cd4f64eb064a4c7

drivers/pci/probe.c +5 -2
index fce2cb2..652095c 100644
@@ -571,9 +571,12 @@ static void pci_read_irq(struct pci_dev 
 	unsigned char irq;
 
 	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq);
-	if (irq)
+	if (irq) {
 		pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
-	dev->irq = irq;
+		dev->irq = irq;
+	} else {
+		dev->irq = NO_IRQ;
+	}
 }
 
 /**

---
0.99.8.GIT