Report serial ports without an IRQ correctly
PATCH 5/5 Report serial ports without an IRQ correctly
Serial ports which have an IRQ set to NO_IRQ should report "polled" instead of "irq = -1" or "irq = 0"
Signed-off-by Matthew Wilcox <[email protected]>
---
drivers/serial/serial_core.c | 11 +++++++++-- 1 files changed, 9 insertions(+), 2 deletions(-)
applies-to: aa693abc4cf3b02945bdfdec1ddf14352c8b89c7 d83c67ef7a731df90db77d44542fad00a70cab53
drivers/serial/serial_core.c +9 -2
@@ -1961,6 +1961,7 @@ static inline void uart_report_port(struct uart_driver *drv, struct uart_port *port) { char address[64]; +char irq[16 ];switch (port->iotype) {case UPIO_PORT :
@@ -1982,10 +1983,16 @@ uart_report_port(struct uart_driver *drvbreak ; } -printk (KERN_INFO "%s%s%s%d at %s (irq = %d) is a %s\n" , +if (port->irq ==NO_IRQ ) { +strlcpy (irq,"polled" ,sizeof (irq)); + }else { +snprintf (irq,sizeof (irq),"irq = %d" , port->irq); + } + +printk (KERN_INFO "%s%s%s%d at %s (%s) is a %s\n" , port->dev ? port->dev->bus_id :"" , port->dev ?": " :"" , - drv->dev_name, port->line, address, port->irq,uart_type (port)); + drv->dev_name, port->line, address, irq,uart_type (port)); } static void
---
0.99.8.GIT