Skip to contentSkip to conversation

i2c: add BroadCom HT-1000 to i2c-piix

PATCH Superseded Martin Devera 1 participant 2 messages Feb 15, 2006

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 i2c: add BroadCom HT-1000 to i2c-piix

From: Martin Devera <devik at cdi.cz>

Add BroadCom HT-1000 south bridge's PCI ID to i2c-piix driver. Note that at least on Supermicro H8SSL it uses non-standard SMBHSTCFG = 3 and standard values like 0 or 9 causes hangup.

Signed-off-by Martin Devera <devik at cdi.cz>

---
Kudos to Rudolf Marek for its helpful comments.

drivers/i2c/busses/i2c-piix4.c +2 -0
diff -ur a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
@@ -419,6 +419,8 @@
 	  .driver_data = 0 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6),
 	  .driver_data = 0 },
+	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB),
+	  .driver_data = 0 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3),
 	  .driver_data = 3 },
 	{ PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3),
include/linux/pci_ids.h +1 -0
diff -ur a/include/linux/pci_ids.h b/include/linux/pci_ids.h
@@ -1343,6 +1343,7 @@
 #define PCI_DEVICE_ID_SERVERWORKS_OSB4	  0x0200
 #define PCI_DEVICE_ID_SERVERWORKS_CSB5	  0x0201
 #define PCI_DEVICE_ID_SERVERWORKS_CSB6    0x0203
+#define PCI_DEVICE_ID_SERVERWORKS_HT1000SB 0x0205
 #define PCI_DEVICE_ID_SERVERWORKS_OSB4IDE 0x0211
 #define PCI_DEVICE_ID_SERVERWORKS_CSB5IDE 0x0212
 #define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE 0x0213
#1 lore raw

PATCH 1/1 i2c: add BroadCom HT-1000 to i2c-piix

oops sorry, I was testing sending of formated patch while it is not final yet :(( More will come...