Skip to contentSkip to conversation

Detailed documents......

U-Boot-Users Mehul Gohel 2 participants 4 messages Mar 17, 2006 – Mar 18, 2006

lore
Share & tools
lore
#0 lore raw

Hi All,
I am fresh engineer in this field working with DM6446 EVM DAVINCI board
which contains DSP as well ARMEJ9. I need to bring that board up. I don't have any experience of how to load the boot loader, how the things goes after boot loader get loaded, so and so. I am working by reading all the document in u-boot source tree and going through the code of u-boot-1.1.3. So can anybody help me to provide document kind of material that gives step wise DETAIL of all the steps starting from boot loader installation to running kernel. such that it helps me to make my task ease. I am going to download the boot loader file through UART to internal RAM of ARM. Because I am confused that how to write the image in NAND FLASH, thats why I am using the other option and that is to download the boot image from UART where one host utility will be runing on the host PC that does few handshaking with board's primary boot loader and than downloads secondry boot loader from the host PC.

Thanks,
Mehul Gohel

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20060317/6b3cf61b/attachment.htm

#1 lore raw
Quoted 6 lines · In message <[email protected]> you wrote:

I am fresh engineer in this field working with DM6446 EVM DAVINCI board
which contains DSP as well ARMEJ9. I need to bring that board up. I don't have any experience of how to load the boot loader, how the things goes after boot loader get loaded, so and so. I am working by reading all the document in u-boot source tree and going through the code of u-boot-1.1.3.

Why are you starting with OLD code? Please use the top of tree from the git repository instead!

Quoted 5 lines

am confused that how to write the image in NAND FLASH, thats why I am using the other option and that is to download the boot image from UART where one host utility will be runing on the host PC that does few handshaking with board's primary boot loader and than downloads secondry boot loader from the host PC.

You should really start reading the FAQ.

Quoted 3 lines

Content-Type: text/html;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable

And NEVER post HTML!

Best regards,

Wolfgang Denk

Signature · 5 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"My name is Linus Torvalds, you messed with my kernel, prepare to die"
                                                  - Linus Torvalds in
      <[email protected]>
#3 lore raw
In reply to Mehul Gohel
Quoted 3 lines · In message <[email protected]> you wrote:

well sorry for posting mail in HTML, I've started compiling uboot and at the first instant I am getting error something like

And please also never full-quote!

Quoted 2 lines

[root at localhost u-boot-1.1.3]# make davinci_config Configuring for davinci board...

I understand this is your custom board configuration, right?

Quoted 2 lines

make[1]: Entering directory /home/mehulgohel/u-boot-1.1.3/post/cpu' make[1]: *** No rule to make target asm.S', needed by `.depend'. Stop.

This message is clear: the file "asm.S" in directory "post/cpu" is needed, but cannot be found. Seems your source code is incomplete.

Quoted 2 lines

Did I went wrong any where, I've not touched anything else not any configuration parameter or anything,.

Obviously this is not a complete source code tree.

And, for the last time (I will not repeat this): don't use old versions for current work. Please use the top-of-tree version from the git repository instead.

Quoted 3 lines

Content-Type: text/x-vcard; charset=utf-8;
name="mehul.gohel.vcf"
Content-Transfer-Encoding: 7bit

Arghh.. and omit such crap, please.

Quoted 2 lines

eInfochips Business Disclaimer:
This message may contain confidential, proprietary or legally Privileged information. In case you are not the original intended Recipient of the message, you must not, directly or indirectly, use, Disclose, distribute, print, or copy any part of this me

And never add such stupid disclaimers, either!

It seems you are really trying hard to drop one clanger after another. This is not a good way to get free help...

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It's all Klatchian to me.
        - Terry Pratchett & Stephen Briggs, _The Discworld Companion_
#2 lore raw
In reply to Wolfgang Denk
Quoted 34 lines · Wolfgang Denk
Quoted 7 lines · In message <[email protected]> you wrote:

I am fresh engineer in this field working with DM6446 EVM DAVINCI board
which contains DSP as well ARMEJ9. I need to bring that board up. I don't have any experience of how to load the boot loader, how the things goes after boot loader get loaded, so and so. I am working by reading all the document in u-boot source tree and going through the code of u-boot-1.1.3.

Why are you starting with OLD code? Please use the top of tree from the git repository instead!

Quoted 7 lines

am confused that how to write the image in NAND FLASH, thats why I am using the other option and that is to download the boot image from UART where one host utility will be runing on the host PC that does few handshaking with board's primary boot loader and than downloads secondry boot loader from the host PC.

You should really start reading the FAQ.

Quoted 5 lines

Content-Type: text/html;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable

Quoted 8 lines

And NEVER post HTML!

Best regards,

Wolfgang Denk

well sorry for posting mail in HTML, I've started compiling uboot and at the first instant I am getting error something like

[root at localhost u-boot-1.1.3]# make davinci_config Configuring for davinci board...
[root at localhost u-boot-1.1.3]# make all
make[1]: Entering directory /home/mehulgohel/u-boot-1.1.3/tools' make[1]: .depend' is up to date.
make[1]: Leaving directory /home/mehulgohel/u-boot-1.1.3/tools' make[1]: Entering directory /home/mehulgohel/u-boot-1.1.3/examples' make[1]: `.depend' is up to date.
make[1]: Leaving directory /home/mehulgohel/u-boot-1.1.3/examples' make[1]: Entering directory /home/mehulgohel/u-boot-1.1.3/post' make[1]: `.depend' is up to date.
make[1]: Leaving directory /home/mehulgohel/u-boot-1.1.3/post' make[1]: Entering directory /home/mehulgohel/u-boot-1.1.3/post/cpu' make[1]: *** No rule to make target asm.S', needed by .depend'. Stop. make[1]: Leaving directory `/home/mehulgohel/u-boot-1.1.3/post/cpu'
make: *** [depend] Error 2
[root at localhost u-boot-1.1.3]#

Did I went wrong any where, I've not touched anything else not any configuration parameter or anything,.

Regards,
Mehul Gohel .
-------------- next part --------------
A non-text attachment was scrubbed...
Name: mehul.gohel.vcf
Type: text/x-vcard
Size: 152 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20060318/89150ddf/attachment.vcf