Add MPC8641HPCN board port

Wolfgang,

This set of patches adds the MPC8641HPCN board port. Booting using the Flat Device Tree assumes that Matthew McClintock's patches of June 27 have been applied.

All of these patches can be inspected in plain text and downloaded here:

http://www.jdl.com/software/patches

Furthermore these patches plus Matthew's, can be obtained directly from the u-boot-86xx.git tree found on jdl.com:

Browse it: http://www.jdl.com/git_repos

Clone it: git://www.jdl.com/software/u-boot-86xx.git
http://www.jdl.com/software/u-boot-86xx.git

Apologies for such a large encoded patch. There were single files that exceeded the list post length in plain text form.

Thanks,
jdl

CHANGELOG:

* Add MPC8641HPCN board port
- Add base level mpc86xx CPU support
- Add MPC8641 HPCN board support
- Support Flat Device Tree booting via downloaded DTB file
- Add AHCI S-ATA and PCI-Express
- Supports reset into alternate flash bank

 MAINTAINERS                     |    2
 Makefile                        |   11
 board/mpc8641hpcn/Makefile      |   49 +
 board/mpc8641hpcn/config.mk     |   31 +
 board/mpc8641hpcn/init.S        |  180 +++++
 board/mpc8641hpcn/mpc8641hpcn.c |  426 ++++++++++++
 board/mpc8641hpcn/pixis.c       |  321 +++++++++
 board/mpc8641hpcn/pixis.h       |   33 +
 board/mpc8641hpcn/sys_eeprom.c  |  256 +++++++
 board/mpc8641hpcn/u-boot.lds    |  148 ++++
 common/Makefile                 |    2
 common/cmd_boot.c               |    2
 common/cmd_mac.c                |   66 ++
 common/cmd_scsi.c               |    7
 cpu/mpc86xx/Makefile            |   48 +
 cpu/mpc86xx/cache.S             |  374 +++++++++++
 cpu/mpc86xx/config.mk           |   26 +
 cpu/mpc86xx/cpu.c               |  307 +++++++++
 cpu/mpc86xx/cpu_init.c          |  117 +++
 cpu/mpc86xx/i2c.c               |  269 ++++++++
 cpu/mpc86xx/interrupts.c        |  204 ++++++
 cpu/mpc86xx/pci.c               |  146 ++++
 cpu/mpc86xx/pcie_indirect.c     |  199 ++++++
 cpu/mpc86xx/resetvec.S          |    2
 cpu/mpc86xx/spd_sdram.c         | 1332 ++++++++++++++++++++++++++++++++++++++
 cpu/mpc86xx/speed.c             |  127 ++++
 cpu/mpc86xx/start.S             | 1227 +++++++++++++++++++++++++++++++++++
 cpu/mpc86xx/traps.c             |  226 ++++++
 doc/README.mpc8641hpcn          |  123 ++++
 drivers/Makefile                |    2
 drivers/ahci.c                  |  702 ++++++++++++++++++++
 drivers/rtl8139.c               |    1
 drivers/tsec.c                  |   71 ++
 drivers/tsec.h                  |   20 +
 include/ahci.h                  |  190 +++++
 include/asm-ppc/immap_86xx.h    | 1364 +++++++++++++++++++++++++++++++++++++++
 include/asm-ppc/mmu.h           |   15
 include/asm-ppc/processor.h     |   18 -
 include/asm-ppc/u-boot.h        |    2
 include/common.h                |   14
 include/configs/MPC8641HPCN.h   |  641 ++++++++++++++++++
 include/mpc86xx.h               |  116 +++
 include/pci_ids.h               |    3
 lib_ppc/board.c                 |    6
 net/eth.c                       |   16
 45 files changed, 9424 insertions(+), 18 deletions(-)

Is there a difference between your two resends of the same (?) patches, or what was the reson for resending all parts (execpt 01/03)?

Best regards,

Wolfgang Denk

Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Given a choice between two theories, take the one which is funnier.

Apologies. They should be identical, modulo the fact that the post containing "Apologies for the encoding, its a big port." is really Part 1/3 mislabeled 0/3.

Sorry.

jdl