Skip to contentSkip to conversation

Bad Data CRC

U-Boot-Users Chandru 1 participant 1 message Oct 27, 2006

lore
Share & tools
lore

Chandru

author
#0 lore raw

Hi all,

I am using u-boot 1.1.3 developed for a custom board which uses
INCA Processor(MIPS 4K Core). The root file system is jffs2. Everything goes OK for the first time. My board is coming up and the application is also running. But problem occurs when I download any file through TFTP on to the board 3 or 4 times. I getting the following error,

Hit any key to stop autoboot: 0

### JFFS2 loading '/boot/uImage' to 0x80400000

Scanning JFFS2 FS: .... done.

### JFFS2 load complete: 750401 bytes loaded to 0x80400000

## Booting image at 80400000 ...

Image Name: MIPS Linux-2.4.31-INCAIP-4.3

Created: 2006-09-29 11:39:24 UTC

Image Type: MIPS Linux Kernel Image (gzip compressed)

Data Size: 750337 Bytes = 732.8 kB

Load Address: 80002000

Entry Point: 8019e040

Verifying Checksum ... Bad Data CRC

Got 8a273880 but wanted 64b50ae5

It happens only after doing TFTP several times.

Any advice and suggestions are welcome.

Best regards,

Chandru.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20061027/d79d254a/attachment.htm