Clear up confusion over the CMD_POST and POST_DIAG mess.

PATCH New Jon Loeliger 1 participant 1 message Jul 8, 2007

Share & tools

Jon Loeliger

author

2007-07-08 22:28 UTC #0 lore raw

PATCH 18/18 Clear up confusion over the CMD_POST and POST_DIAG mess.

For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG when it really means just CONFIG_CMD_DIAG. There is no CMD_POST. Clear this mess up some.

Signed-off-by Jon Loeliger <[email protected]>

---
 include/configs/BC3450.h      |    8 ++++----
 include/configs/GEN860T.h     |   10 +++-------
 include/configs/KUP4K.h       |   10 +++-------
 include/configs/KUP4X.h       |   10 +++-------
 include/configs/TB5200.h      |   16 ++++++++--------
 include/configs/TQM5200.h     |    8 ++++----
 include/configs/aev.h         |    8 ++++----
 include/configs/bf537-stamp.h |    8 ++++----
 include/configs/lwmon.h       |   11 ++++-------
 include/configs/smmaco4.h     |    8 ++++----
 include/configs/spieval.h     |   30 +++++++++++++++---------------
 include/configs/uc100.h       |   11 ++++-------
 12 files changed, 60 insertions(+), 78 deletions(-)

include/configs/BC3450.h +4 -4

index 00b656e..aec4d83 100644
@@ -138,11 +138,8 @@
 				 CFG_POST_I2C)
 
 #ifdef CONFIG_POST
-# define CFG_CMD_POST_DIAG CFG_CMD_DIAG
 /* preserve space for the post_word at end of on-chip SRAM */
 # define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-# define CFG_CMD_POST_DIAG 0
 #endif /* CONFIG_POST */

@@ -161,7 +158,6 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_POST_DIAG
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SNTP
 #define CONFIG_CMD_BSP

@@ -192,6 +188,10 @@
     #define CONFIG_CMD_PCI
 #endif
 
+#ifdef CONFIG_POST
+    #define CONFIG_CMD_DIAG
+#endif
+
 
 #define CONFIG_TIMESTAMP		/* display image timestamps */

include/configs/GEN860T.h +3 -7

index 612b661..2b2d15a 100644
@@ -222,12 +222,6 @@
 								CFG_POST_UART		| \
 								CFG_POST_SPR )
 
-#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
-#else
-#define CFG_CMD_POST_DIAG		0
-#endif
-
 
 /*
  * Command line configuration.

@@ -245,12 +239,14 @@
 #define CONFIG_CMD_FPGA
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_BEDBUG
-#define CONFIG_CMD_POST_DIAG
 
 #if !defined(CONFIG_SC)
     #define CONFIG_CMD_DOC
 #endif
 
+#ifdef CONFIG_POST
+u #define CONFIG_CMD_DIAG
+#endif
 
 /*
  * There is no IDE/PCMCIA hardware support on the board.

include/configs/KUP4K.h +3 -7

index 2422201..2f05605 100644
@@ -156,12 +156,6 @@
 #define CONFIG_POST		(CFG_POST_CPU	   | \
 				 CFG_POST_RTC	   | \
 				 CFG_POST_I2C)
-
-#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
-#else
-#define CFG_CMD_POST_DIAG 0
-#endif
 #endif

@@ -175,9 +169,11 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_NFS
-#define CONFIG_CMD_POST_DIAG
 #define CONFIG_CMD_SNTP
 
+#ifdef CONFIG_POST
+    #define CONFIG_CMD_DIAG
+#endif
 
 /*
  * Miscellaneous configurable options

include/configs/KUP4X.h +3 -7

index 184338b..c59b70f 100644
@@ -167,12 +167,6 @@
 #define CONFIG_POST		(CFG_POST_CPU	   | \
 				 CFG_POST_RTC	   | \
 				 CFG_POST_I2C)
-
-#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
-#else
-#define CFG_CMD_POST_DIAG 0
-#endif
 #endif

@@ -187,10 +181,12 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_NFS
-#define CONFIG_CMD_POST_DIAG
 #define CONFIG_CMD_SNTP
 #define CONFIG_CMD_USB
 
+#ifdef CONFIG_POST
+    #define CONFIG_CMD_DIAG
+#endif
 
 /*
  * Miscellaneous configurable options

include/configs/TB5200.h +8 -8

index f64c522..3d90efb 100644
@@ -82,11 +82,8 @@
 				 CFG_POST_I2C)
 
 #ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
 /* preserve space for the post_word at end of on-chip SRAM */
 #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-#define CFG_CMD_POST_DIAG 0
 #endif

@@ -95,10 +92,6 @@
  */
 #include <config_cmd_default.h>
 
-#ifdef CONFIG_VIDEO
-#define CONFIG_CMD_BMP
-#endif
-
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP

@@ -112,12 +105,19 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_POST_DIAG
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SNTP
 #define CONFIG_CMD_BSP
 #define CONFIG_CMD_USB
 
+#ifdef CONFIG_VIDEO
+#define CONFIG_CMD_BMP
+#endif
+
+#ifdef CONFIG_POST
+#define CONFIG__CMD_DIAG
+#endif
+
 
 #define	CONFIG_TIMESTAMP		/* display image timestamps */

include/configs/TQM5200.h +4 -4

index 24114b8..598c1c6 100644
@@ -142,11 +142,8 @@
 #endif
 
 #ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
 /* preserve space for the post_word at end of on-chip SRAM */
 #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-#define CFG_CMD_POST_DIAG 0
 #endif

@@ -164,7 +161,6 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_POST_DIAG
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SNTP
 #define CONFIG_CMD_BSP

@@ -188,6 +184,10 @@
     #define CONFIG_CFG_FAT
 #endif
 
+#ifdef CONFIG_POST
+    #define CONFIG_CMD_DIAG
+#endif
+
 
 #define	CONFIG_TIMESTAMP		/* display image timestamps */

include/configs/aev.h +4 -4

index ecd84d3..93b20db 100644
@@ -86,11 +86,8 @@
 				 CFG_POST_I2C)
 
 #ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
 /* preserve space for the post_word at end of on-chip SRAM */
 #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-#define CFG_CMD_POST_DIAG 0
 #endif

@@ -109,10 +106,13 @@
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_POST
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SNTP
 
+#ifdef CONFIG_POST
+#define CONFIG_CMD_DIAG
+#endif
+
 
 #define	CONFIG_TIMESTAMP		/* display image timestamps */

include/configs/bf537-stamp.h +4 -4

index 36f55d1..bea157a 100644
@@ -144,11 +144,8 @@
 #endif
 
 #ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG	CFG_CMD_DIAG
 #define FLASH_START_POST_BLOCK	11	/* Should > = 11 */
 #define FLASH_END_POST_BLOCK	71	/* Should < = 71 */
-#else
-#define CFG_CMD_POST_DIAG	0
 #endif
 
 /* CF-CARD IDE-HDD Support */

@@ -197,7 +194,10 @@
 #if (BFIN_BOOT_MODE == BF537_BYPASS_BOOT)
 
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_POST_DIAG
+
+#if defined(CONFIG_POST)
+#define CONFIG_CMD_DIAG
+#endif
 
 #ifdef CONFIG_BF537_NAND
 #define CONFIG_CMD_NAND

include/configs/lwmon.h +4 -7

index 3dc7a8e..1db5e90 100644
@@ -170,12 +170,6 @@
 
 #define CONFIG_RTC_PCF8563		/* use Philips PCF8563 RTC	*/
 
-#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
-#else
-#define CFG_CMD_POST_DIAG 0
-#endif
-
 
 /*
  * Command line configuration.

@@ -192,9 +186,12 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_NFS
-#define CONFIG_CMD_POST
 #define CONFIG_CMD_SNTP
 
+#ifdef CONFIG_POST
+#define CONFIG_CMD_DIAG
+#endif
+
 
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION

include/configs/smmaco4.h +4 -4

index 8d09857..a965e8a 100644
@@ -60,11 +60,8 @@
 				 CFG_POST_I2C)
 
 #ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
 /* preserve space for the post_word at end of on-chip SRAM */
 #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-#define CFG_CMD_POST_DIAG 0
 #endif

@@ -82,10 +79,13 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_POST
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_SNTP
 
+#ifdef CONFIG_POST
+#define CONFIG_CMD_DIAG
+#endif
+
 
 #define	CONFIG_TIMESTAMP		/* display image timestamps */

include/configs/spieval.h +15 ~~-15~~

index e480df5..ccfcf1c 100644
@@ -116,11 +116,8 @@
 				 CFG_POST_I2C)
 
 #ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG CFG_CMD_DIAG
 /* preserve space for the post_word@end of on-chip SRAM */
 #define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
-#else
-#define CFG_CMD_POST_DIAG 0
 #endif

@@ -129,6 +126,18 @@
  */
 #include <config_cmd_default.h>
 
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+
 #if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX)
     #define CONFIG_CMD_IDE
     #define CONFIG_CMD_FAT

@@ -148,18 +157,9 @@
     #define CONFIG_CMD_PCI
 #endif
 
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_POST
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SNTP
+#ifdef CONFIG_POST
+#define CONFIG_CMD_DIAG
+#endif
 
 
 #define	CONFIG_TIMESTAMP		/* display image timestamps */

include/configs/uc100.h +4 -7

index 2bdc55b..d223c58 100644
@@ -117,12 +117,6 @@
 				CFG_POST_SPR )
 #undef  CONFIG_POST
 
-#ifdef CONFIG_POST
-#define CFG_CMD_POST_DIAG       CFG_CMD_DIAG
-#else
-#define CFG_CMD_POST_DIAG	0
-#endif
-
 
 /*
  * Command line configuration.

@@ -140,9 +134,12 @@
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_POST
 #define CONFIG_CMD_SNTP
 
+#ifdef CONFIG_POST
+#define CONFIG_CMD_DIAG
+#endif
+
 
 #define CONFIG_NETCONSOLE

Signature · 1 line

1.5.2.2.249.g45fd