include/configs/[g-o]: Cleanup BOOTP and lingering CFG_CMD_.

PATCH New Jon Loeliger 1 participant 1 message Jul 10, 2007

Share & tools

Jon Loeliger

author

2007-07-10 16:35 UTC #0 lore raw

PATCH 5/14 include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.

Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h used to be included but CONFIG_BOOTP_MASK was not defined.

Remove lingering references to CFG_CMD_* symbols.

Signed-off-by Jon Loeliger <[email protected]>

---
 include/configs/gth2.h      |    9 +++++++++
 include/configs/hmi1001.h   |   12 ++++++++++--
 include/configs/hymod.h     |    9 +++++++++
 include/configs/idmr.h      |    9 +++++++++
 include/configs/incaip.h    |    9 +++++++++
 include/configs/inka4x0.h   |   12 ++++++++++--
 include/configs/innokom.h   |    9 +++++++++
 include/configs/ixdp425.h   |    9 +++++++++
 include/configs/ixdpg425.h  |    9 +++++++++
 include/configs/jupiter.h   |   14 +++++++++++++-
 include/configs/kb9202.h    |    9 +++++++++
 include/configs/lart.h      |    9 +++++++++
 include/configs/logodl.h    |    9 +++++++++
 include/configs/lpd7a400.h  |    9 +++++++++
 include/configs/lpd7a404.h  |    9 +++++++++
 include/configs/luan.h      |    9 +++++++++
 include/configs/lubbock.h   |    9 +++++++++
 include/configs/mcc200.h    |    9 +++++++++
 include/configs/mecp5200.h  |    9 +++++++++
 include/configs/ml300.h     |    9 +++++++++
 include/configs/mp2usb.h    |    9 +++++++++
 include/configs/mx1ads.h    |    9 +++++++++
 include/configs/mx1fs2.h    |   11 ++++++++++-
 include/configs/ns9750dev.h |    9 +++++++++
 include/configs/o2dnt.h     |   13 ++++++++++---
 include/configs/ocotea.h    |    9 +++++++++
 26 files changed, 242 insertions(+), 9 deletions(-)

include/configs/gth2.h +9 -0

index 0247b7d..c2a50c1 100644
@@ -73,6 +73,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

include/configs/hmi1001.h +10 -2

index 7e1897a..6c15b4e 100644
@@ -52,6 +52,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

@@ -242,8 +251,7 @@
 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 /*
- * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
- * which is normally part of the default commands (CFV_CMD_DFL)
+ * Enable loopw command.
  */
 #define CONFIG_LOOPW

include/configs/hymod.h +9 -0

index 8a3ad68..b789067 100644
@@ -174,6 +174,15 @@
 #define CONFIG_LAST_STAGE_INIT
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_all.h>

include/configs/idmr.h +9 -0

index 9926633..1ab7b27 100644
@@ -80,6 +80,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

include/configs/incaip.h +9 -0

index ef8f724..4caf54e 100644
@@ -83,6 +83,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

include/configs/inka4x0.h +10 -2

index 19f2f19..0fac28f 100644
@@ -73,6 +73,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

@@ -259,8 +268,7 @@
 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
 
 /*
- * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
- * which is normally part of the default commands (CFV_CMD_DFL)
+ * Enable loopw command.
  */
 #define CONFIG_LOOPW

include/configs/innokom.h +9 -0

index 38ccf89..5310e0d 100644
@@ -56,6 +56,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */

include/configs/ixdp425.h +9 -0

index 8c1ab24..bc5f9e1 100644
@@ -55,6 +55,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

include/configs/ixdpg425.h +9 -0

index 6c103ce..da59230 100644
@@ -77,6 +77,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

include/configs/jupiter.h +13 -1

index e53b848..b68c5aa 100644
@@ -66,7 +66,6 @@
 #define CONFIG_PCI_IO_BUS	0x50000000
 #define CONFIG_PCI_IO_PHYS	CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE	0x01000000
-#define ADD_PCI_CMD 		CFG_CMD_PCI
 #endif
 
 #define CFG_XLB_PIPELINING	1

@@ -84,6 +83,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

@@ -91,6 +99,10 @@
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
+#if defined(CONFIG_PCI)
+#define CODFIG_CMD_PCI
+#endif
+
 
 /*
  * Autobooting

include/configs/kb9202.h +9 -0

index 4741ead..75d9c3b 100644
@@ -80,6 +80,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

include/configs/lart.h +9 -0

index 98bc3b2..8f18c9f 100644
@@ -61,6 +61,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

include/configs/logodl.h +9 -0

index 7c11eeb..2b2d377 100644
@@ -56,6 +56,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #define CONFIG_CMD_ASKENV

include/configs/lpd7a400.h +9 -0

index 414cb14..0414889 100644
@@ -57,6 +57,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

include/configs/lpd7a404.h +9 -0

index 87815cb..11ede96 100644
@@ -57,6 +57,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

include/configs/luan.h +9 -0

index 82af2fb..72aae09 100644
@@ -215,6 +215,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

include/configs/lubbock.h +9 -0

index eed5890..4adf254 100644
@@ -69,6 +69,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

include/configs/mcc200.h +9 -0

index 10e25f0..744f551 100644
@@ -93,6 +93,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

include/configs/mecp5200.h +9 -0

index 6f0d497..49919fb 100644
@@ -88,6 +88,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

include/configs/ml300.h +9 -0

index 423c6eb..0183041 100644
@@ -89,6 +89,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

include/configs/mp2usb.h +9 -0

index 3a62240..8d6f261 100644
@@ -130,6 +130,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

include/configs/mx1ads.h +9 -0

index 0ae2780..5125b21 100644
@@ -80,6 +80,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

include/configs/mx1fs2.h +10 -1

index 47ca0f1..d527d09 100644
@@ -36,6 +36,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

@@ -159,7 +168,7 @@
  * Right now there is no gain for user, but later on booting kernel might be
  * possible. Consider using XIP kernel running from flash to save RAM
  * footprint.
- * NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support.
+ * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
  */
 
 /*

include/configs/ns9750dev.h +9 -0

index e1806a7..1d691f9 100644
@@ -71,6 +71,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */

include/configs/o2dnt.h +10 -3

index 9ed1ed8..f1d73e4 100644
@@ -68,8 +68,6 @@
 #define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X		1
 
-#define ADD_PCI_CMD 		CFG_CMD_PCI
-
 /* Partitions */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION

@@ -79,6 +77,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

@@ -89,7 +96,7 @@
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
-#define CONFIG_PCI_CMD
+#define CONFIG_CMD_PCI
 
 
 #if (TEXT_BASE == 0xFF000000)		/* Boot low with 16 MB Flash */

include/configs/ocotea.h +9 -0

index fd45c1d..bc2fd33 100644
@@ -234,6 +234,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>

Signature · 1 line

1.5.2.2.249.g45fd