include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
PATCH 6/14 include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h used to be included but CONFIG_BOOTP_MASK was not defined.
Remove lingering references to CFG_CMD_* symbols.
Signed-off-by Jon Loeliger <[email protected]>
--- board/fads/fads.h | 10 ++++++++++ include/configs/MPC8313ERDB.h | 9 +++++++++ include/configs/MPC832XEMDS.h | 9 +++++++++ include/configs/MPC8568MDS.h | 9 +++++++++ include/configs/acadia.h | 9 +++++++++ include/configs/bf533-ezkit.h | 9 +++++++++ include/configs/bf533-stamp.h | 9 +++++++++ include/configs/bf537-stamp.h | 9 +++++++++ include/configs/bf561-ezkit.h | 9 +++++++++ include/configs/integratorap.h | 9 +++++++++ include/configs/integratorcp.h | 9 +++++++++ include/configs/katmai.h | 9 +++++++++ include/configs/lwmon5.h | 9 +++++++++ include/configs/ml401.h | 9 +++++++++ include/configs/motionpro.h | 9 +++++++++ include/configs/p3p440.h | 9 +++++++++ include/configs/pb1x00.h | 9 +++++++++ include/configs/pcs440ep.h | 9 +++++++++ include/configs/pdnb3.h | 9 +++++++++ include/configs/pf5200.h | 24 +++++++++++++----------- include/configs/pleb2.h | 9 +++++++++ include/configs/ppmc7xx.h | 9 +++++++++ include/configs/purple.h | 9 +++++++++ include/configs/pxa255_idp.h | 9 +++++++++ include/configs/r5200.h | 9 +++++++++ include/configs/rsdproto.h | 9 +++++++++ include/configs/sbc2410x.h | 9 +++++++++ include/configs/sbc8349.h | 9 +++++++++ include/configs/sbc8560.h | 9 +++++++++ include/configs/sc3.h | 9 +++++++++ include/configs/sc520_cdp.h | 9 +++++++++ include/configs/sc520_spunk.h | 9 +++++++++ include/configs/scb9328.h | 11 ++++++++++- include/configs/sequoia.h | 9 +++++++++ include/configs/shannon.h | 9 +++++++++ include/configs/smdk2400.h | 9 +++++++++ include/configs/smdk2410.h | 9 +++++++++ include/configs/smmaco4.h | 12 ++++++++++-- include/configs/sorcery.h | 9 +++++++++ include/configs/spc1920.h | 11 ++++++++++- include/configs/spieval.h | 12 ++++++++++-- include/configs/stxgp3.h | 9 +++++++++ include/configs/stxssa.h | 9 +++++++++ include/configs/suzaku.h | 9 +++++++++ include/configs/taishan.h | 9 +++++++++ include/configs/tb0229.h | 9 +++++++++ include/configs/trab.h | 9 +++++++++ include/configs/uc101.h | 12 ++++++++++-- include/configs/utx8245.h | 9 +++++++++ include/configs/v38b.h | 9 +++++++++ include/configs/walnut.h | 9 +++++++++ include/configs/wepep250.h | 11 ++++++++++- include/configs/xaeniax.h | 9 +++++++++ include/configs/xm250.h | 9 +++++++++ include/configs/xsengine.h | 9 +++++++++ include/configs/xupv2p.h | 9 +++++++++ include/configs/yosemite.h | 9 +++++++++ include/configs/yucca.h | 9 +++++++++ include/configs/zylonite.h | 9 +++++++++ 59 files changed, 542 insertions(+), 20 deletions(-)
board/fads/fads.h +10 -0
@@ -95,6 +95,16 @@#define CFG_DISCOVER_PHY #endif + +/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +#if !defined(FADS_COMMANDS_ALREADY_DEFINED )/* * Command line configuration.
include/configs/MPC8313ERDB.h +9 -0
@@ -342,6 +342,15 @@#define CFG_LOADS_BAUD_CHANGE 1/* allow baudrate change */ /* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/MPC832XEMDS.h +9 -0
@@ -424,6 +424,15 @@#define CFG_LOADS_BAUD_CHANGE 1/* allow baudrate change */ /* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/MPC8568MDS.h +9 -0
@@ -385,6 +385,15 @@ extern unsigned long get_clock_freq(void);/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/acadia.h +9 -0
@@ -300,6 +300,15 @@#define CONFIG_SUPPORT_VFAT /* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/bf533-ezkit.h +9 -0
@@ -98,6 +98,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/bf533-stamp.h +9 -0
@@ -290,6 +290,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/bf537-stamp.h +9 -0
@@ -164,6 +164,15 @@#define CONFIG_NET_MULTI 1/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/bf561-ezkit.h +9 -0
@@ -188,6 +188,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/integratorap.h +9 -0
@@ -70,6 +70,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */
include/configs/integratorcp.h +9 -0
@@ -72,6 +72,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #define CONFIG_CMD_BDI
include/configs/katmai.h +9 -0
@@ -212,6 +212,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/lwmon5.h +9 -0
@@ -225,6 +225,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/ml401.h +9 -0
@@ -146,6 +146,15 @@#endif /* !FLASH */ /* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/motionpro.h +9 -0
@@ -37,6 +37,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/p3p440.h +9 -0
@@ -170,6 +170,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/pb1x00.h +9 -0
@@ -178,6 +178,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/pcs440ep.h +9 -0
@@ -210,6 +210,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/pdnb3.h +9 -0
@@ -73,6 +73,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/pf5200.h +13 -11
@@ -85,13 +85,6 @@#define CFG_RX_ETH_BUFFER 8/* use 8 rx buffer on eepro100 */ #define CONFIG_NS8382X 1#endif - -#define ADD_PCI_CMD CFG_CMD_PCI - -#else /* MPC5100 */ - -#define ADD_PCI_CMD 0/* no CFG_CMD_PCI */ -#endif /* Partitions */
@@ -101,26 +94,35 @@/* USB */ #if 0 #define CONFIG_USB_OHCI -#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT#define CONFIG_USB_STORAGE -#else -#define ADD_USB_CMD 0#endif /* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h> #define CONFIG_CMD_BSP -#define CONFIG_PCI_CMD #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ELF #define CONFIG_CMD_FAT #define CONFIG_CMD_I2C #define CONFIG_CMD_IDE +#ifdef CONFIG_MPC5200 +#define CONFIG_CMD_PCI +#endif +#if (TEXT_BASE ==0xFF000000 )/* Boot low with 16 MB Flash */ # define CFG_LOWBOOT 1
include/configs/pleb2.h +9 -0
@@ -68,6 +68,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/ppmc7xx.h +9 -0
@@ -69,6 +69,15 @@*/ /* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/purple.h +9 -0
@@ -83,6 +83,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/pxa255_idp.h +9 -0
@@ -104,6 +104,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/r5200.h +9 -0
@@ -68,6 +68,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/rsdproto.h +9 -0
@@ -103,6 +103,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/sbc2410x.h +9 -0
@@ -84,6 +84,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/sbc8349.h +9 -0
@@ -441,6 +441,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/sbc8560.h +9 -0
@@ -322,6 +322,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/sc3.h +9 -0
@@ -169,6 +169,15 @@#define CONFIG_PHY_ADDR 1/* the connected Phy defaults to address 1 */ /* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/sc520_cdp.h +9 -0
@@ -67,6 +67,15 @@#define CONFIG_BAUDRATE 9600/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/sc520_spunk.h +9 -0
@@ -66,6 +66,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/scb9328.h +10 -1
@@ -36,6 +36,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
@@ -180,7 +189,7 @@* Right now there is no gain for user, but later on booting kernel might be * possible. Consider using XIP kernel running from flash to save RAM * footprint. -* NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support. +* NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. */ #define CFG_JFFS2_FIRST_BANK 0#define CFG_JFFS2_FIRST_SECTOR 5
include/configs/sequoia.h +9 -0
@@ -308,6 +308,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/shannon.h +9 -0
@@ -68,6 +68,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/smdk2400.h +9 -0
@@ -88,6 +88,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/smdk2410.h +9 -0
@@ -74,6 +74,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/smmaco4.h +10 -2
@@ -66,6 +66,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
@@ -338,8 +347,7 @@#endif /* -* Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, -* which is normally part of the default commands (CFV_CMD_DFL) +* Enable loopw command. */ #define CONFIG_LOOPW
include/configs/sorcery.h +9 -0
@@ -65,6 +65,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/spc1920.h +10 -1
@@ -82,6 +82,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
@@ -194,7 +203,7 @@#define CFG_CACHELINE_SIZE 16/* For all MPC8xx CPUs */ #define CFG_CACHELINE_SHIFT 4/* log base 2 of the above value */ -#ifdef CFG_CMD_DATE +#ifdef CONFIG_CMD_DATE # define CONFIG_RTC_DS3231 # define CFG_I2C_RTC_ADDR 0x68#endif
include/configs/spieval.h +10 -2
@@ -122,6 +122,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
@@ -419,8 +428,7 @@#endif /* -* Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, -* which is normally part of the default commands (CFV_CMD_DFL) +* Enable loopw command. */ #define CONFIG_LOOPW
include/configs/stxgp3.h +9 -0
@@ -299,6 +299,15 @@#define CFG_LOADS_BAUD_CHANGE 1/* allow baudrate change */ /* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/stxssa.h +9 -0
@@ -327,6 +327,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/suzaku.h +9 -0
@@ -57,6 +57,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/taishan.h +9 -0
@@ -236,6 +236,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/tb0229.h +9 -0
@@ -89,6 +89,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/trab.h +9 -0
@@ -132,6 +132,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/uc101.h +10 -2
@@ -52,6 +52,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
@@ -265,8 +274,7 @@#endif /* -* Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, -* which is normally part of the default commands (CFV_CMD_DFL) +* Enable loopw command. */ #define CONFIG_LOOPW
include/configs/utx8245.h +9 -0
@@ -88,6 +88,15 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/v38b.h +9 -0
@@ -86,6 +86,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/walnut.h +9 -0
@@ -100,6 +100,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/wepep250.h +10 -1
@@ -36,6 +36,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
@@ -149,7 +158,7 @@* Right now there is no gain for user, but later on booting kernel might be * possible. Consider using XIP kernel running from flash to save RAM * footprint. -* NOTE: Enable CFG_CMD_JFFS2 for JFFS2 support. +* NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support. */ #define CFG_JFFS2_FIRST_BANK 0#define CFG_JFFS2_FIRST_SECTOR 5
include/configs/xaeniax.h +9 -0
@@ -66,6 +66,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/xm250.h +9 -0
@@ -83,6 +83,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/xsengine.h +9 -0
@@ -104,6 +104,15 @@#define CONFIG_BAUDRATE 115200/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/xupv2p.h +9 -0
@@ -121,6 +121,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/yosemite.h +9 -0
@@ -250,6 +250,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/yucca.h +9 -0
@@ -193,6 +193,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
include/configs/zylonite.h +9 -0
@@ -78,6 +78,15 @@/* +* BOOTP options +*/ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* * Command line configuration. */ #include <config_cmd_default.h>
Signature · 1 line
1.5.2.2.249.g45fd