Skip to contentSkip to conversation

AT91 Advanced Interrupt Controller

PATCH In review Filip Navara 1 participant 1 message Jul 15, 2009

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 3/14 AT91 Advanced Interrupt Controller

Emulation of AIC has 32 input pins corresponding to the input interrupt sources and two output pins corresponding to the IRQ and FIQ pins on the processor. All features of the controller with the exception of external interrupt handling are emulated according to the documentation. This includes emulation of the debug register, edge and level triggered interrupts, software interrupts and interrupt nesting.

External interrupt handling is not implemented because it differs between various AT91 family microcontrollers in the number of externally exposed pins. The only feature of the external interrupt processing that is not implemented is inverting the level of input signal. Should the need arise, adding proper implementation of external interrupt logic shouldn't be hard.

---
 Makefile.target |    1 +
 hw/at91_aic.c   |  364 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 365 insertions(+), 0 deletions(-)
 create mode 100644 hw/at91_aic.c
Makefile.target +1 -0
index 5c1bd4a..4a81e68 100644
@@ -666,6 +666,7 @@ obj-y += framebuffer.o
 obj-y += syborg.o syborg_fb.o syborg_interrupt.o syborg_keyboard.o
 obj-y += syborg_serial.o syborg_timer.o syborg_pointer.o syborg_rtc.o
 obj-y += syborg_virtio.o
+obj-y += at91_aic.o
 obj-y += gpio_rotary.o gpio_keypad.o
 CPPFLAGS += -DHAS_AUDIO
 endif
hw/at91_aic.c new file +364 -0

364 lines not on this page · raw message

Signature · 1 line
1.6.3.msysgit.0