HD44780 LCD Controller
Subsystems (2)
PATCH 14/14 HD44780 LCD Controller
Only very simple emulation of the LCD controller is included.
The controller features the standard HD44780 interface and supports character output on four lines using a static 5x7 font and optional backlight controlled by signal on a separate pin.
Capabilities such as custom characters, cursor and 5x10 fonts are not implemented. Saving/loading of device state is not implemented either.
Signed-off-by Filip Navara <[email protected]>
--- Makefile.target | 2 +- hw/at91pes.c | 10 ++ hw/hd44780.c | 418 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 429 insertions(+), 1 deletions(-) create mode 100644 hw/hd44780.c
Makefile.target +1 -1
@@ -668,7 +668,7 @@ obj-y += syborg_serial.o syborg_timer.o syborg_pointer.o syborg_rtc.o obj-y += syborg_virtio.o obj-y += at91_aic.o at91_dbgu.o at91_pio.o at91_pit.o at91_pmc.o at91_rtt.o obj-y += at91_rstc.o at91_intor.o at91_tc.o at91_emac.o at91pes.o -obj-y += gpio_rotary.o gpio_keypad.o +obj-y += gpio_rotary.o gpio_keypad.o hd44780.o CPPFLAGS += -DHAS_AUDIO endif ifeq ($(TARGET_BASE_ARCH), sh4)
hw/at91pes.c +10 -0
@@ -95,6 +95,16 @@ static void at91pes_init(ram_addr_t ram_size,sysbus_mmio_map (sysbus_from_qdev (dev),0 ,0xFFFDC000 );sysbus_connect_irq (sysbus_from_qdev (dev),0 , pic[16 ]); + dev =qdev_create (NULL ,"gpio,hd44780" ); +qdev_init (dev); +for (i =0 ; i <3 ; i++) +qdev_connect_gpio_out (pioa,15 - i,qdev_get_gpio_in (dev,8 + i)); +qdev_connect_gpio_out (piob,28 ,qdev_get_gpio_in (dev,11 )); +for (i =0 ; i <4 ; i++) { +qdev_connect_gpio_out (pioa,5 + i,qdev_get_gpio_in (dev,4 + i)); +qdev_connect_gpio_out (dev,4 + i,qdev_get_gpio_in (pioa,5 + i)); + } + dev =qdev_create (NULL ,"gpio,keypad" );qdev_set_prop_ptr (dev,"keys" , keys);qdev_init (dev);
hw/hd44780.c new file +418 -0
418 lines not on this page · raw message
Signature · 1 line
1.6.3.msysgit.0