Skip to contentSkip to conversation

Applied "regulator: act8865: add DT binding for property "active-semi,vsel-high"" to the regulator tree

PATCH Mark Brown 1 participant 1 message Oct 2, 2015

Subsystems (2)
lore
Share & tools
lore

Mark Brown

author maintainer
#0 lore raw

The patch

regulator: act8865: add DT binding for property "active-semi,vsel-high"

has been applied to the regulator tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From 1f37cbe2a2153e0981f43fa86aa2004c42761d5d Mon Sep 17 00:00:00 2001

From: Wenyou Yang <[email protected]>
Date: Wed, 30 Sep 2015 15:25:50 +0800
Subject: [PATCH] regulator: act8865: add DT binding for property
"active-semi,vsel-high"

Add a DT property "active-semi,vsel-high" to indicate the VSEL pin is high. If this property is missing, then assume the VSEL pin is low(0).

---
 Documentation/devicetree/bindings/regulator/act8865-regulator.txt | 3 +++
 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/regulator/act8865-regulator.txt +3 -0
index e91485d..6067d98 100644
@@ -8,6 +8,8 @@ Required properties:
 Optional properties:
 - system-power-controller: Telling whether or not this pmic is controlling
   the system power. See Documentation/devicetree/bindings/power/power-controller.txt .
+- active-semi,vsel-high: Indicates the VSEL pin is high.
+  If this property is missing, assume the VSEL pin is low(0).
 
 Optional input supply properties:
 - for act8600:
@@ -49,6 +51,7 @@ Example:
 			pmic: act8865@5b {
 				compatible = "active-semi,act8865";
 				reg = <0x5b>;
+				active-semi,vsel-high;
 				status = "disabled";
 
 				regulators {
Signature · 1 line
2.5.0