Applied "regulator: i.MX anatop: Allow supply regulator" to the regulator tree
Subsystems (2)
Mark Brown
maintainerThe patch
regulator: i.MX anatop: Allow supply regulator
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
0d19208e70b3a65144c7a0b6368f849c57818242Mon Sep 17 00:00:00 2001
From: Sascha Hauer <[email protected]>
Date: Tue, 13 Oct 2015 12:45:30 +0200
Subject: [PATCH] regulator: i.MX anatop: Allow supply regulator
The anatop regulators are SoC internal LDO regulators usually supplied by an external PMIC. This patch adds support for specifying the supply from the device tree using the vin-supply property.
--- Documentation/devicetree/bindings/regulator/anatop-regulator.txt | 1 + drivers/regulator/anatop-regulator.c | 3 +++ 2 files changed, 4 insertions(+)
Documentation/devicetree/bindings/regulator/anatop-regulator.txt +1 -0
@@ -13,6 +13,7 @@ Optional properties: - anatop-delay-reg-offset: Anatop MFD step time register offset - anatop-delay-bit-shift: Bit shift for the step time register - anatop-delay-bit-width: Number of bits used in the step time register +- vin-supply: The supply for this regulator Any property defined as part of the core regulator binding, defined in regulator.txt, can also be used.
drivers/regulator/anatop-regulator.c +3 -0
@@ -30,6 +30,7 @@#include <linux/regmap.h> #include <linux/regulator/driver.h> #include <linux/regulator/of_regulator.h> +#include <linux/regulator/machine.h> #define LDO_RAMP_UP_UNIT_IN_CYCLES 64/* 64 cycles per step */ #define LDO_RAMP_UP_FREQ_IN_MHZ 24/* cycle based on 24M OSC */
@@ -199,6 +200,7 @@ static int anatop_regulator_probe(struct platform_device *pdev) rdesc->owner =THIS_MODULE ; initdata =of_get_regulator_init_data (dev, np, rdesc); + initdata->supply_regulator ="vin" ; sreg->initdata = initdata; anatop_np =of_get_parent (np);
@@ -262,6 +264,7 @@ static int anatop_regulator_probe(struct platform_device *pdev) rdesc->vsel_reg = sreg->control_reg; rdesc->vsel_mask = ((1 << sreg->vol_bit_width) -1 ) << sreg->vol_bit_shift; + rdesc->min_dropout_uV =125000 ; config.dev = &pdev->dev; config.init_data = initdata;
Signature · 1 line
2.6.1