Skip to contentSkip to conversation

net: stmmac: imx: use dwmac_set_tx_clk_gmii()

PATCH In review Russell King (Oracle) 1 participant 1 message Sep 11, 2023

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

PATCH 2/6 net: stmmac: imx: use dwmac_set_tx_clk_gmii()

---
 .../net/ethernet/stmicro/stmmac/dwmac-imx.c   | 27 ++++++-------------
 1 file changed, 8 insertions(+), 19 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c +8 -19
index df34e34cc14f..d2569faf7cc3 100644
@@ -21,6 +21,7 @@
 #include <linux/stmmac.h>
 
 #include "stmmac_platform.h"
+#include "stmmac_plat_lib.h"
 
 #define GPR_ENET_QOS_INTF_MODE_MASK	GENMASK(21, 16)
 #define GPR_ENET_QOS_INTF_SEL_MII	(0x0 << 16)
@@ -186,7 +187,6 @@ static void imx_dwmac_fix_speed(void *priv, unsigned int speed, unsigned int mod
 {
 	struct plat_stmmacenet_data *plat_dat;
 	struct imx_priv_data *dwmac = priv;
-	unsigned long rate;
 	int err;
 
 	plat_dat = dwmac->plat_dat;
@@ -196,24 +196,13 @@ static void imx_dwmac_fix_speed(void *priv, unsigned int speed, unsigned int mod
 	    (plat_dat->mac_interface == PHY_INTERFACE_MODE_MII))
 		return;
 
-	switch (speed) {
-	case SPEED_1000:
-		rate = 125000000;
-		break;
-	case SPEED_100:
-		rate = 25000000;
-		break;
-	case SPEED_10:
-		rate = 2500000;
-		break;
-	default:
-		dev_err(dwmac->dev, "invalid speed %u\n", speed);
-		return;
-	}
-
-	err = clk_set_rate(dwmac->clk_tx, rate);
-	if (err < 0)
-		dev_err(dwmac->dev, "failed to set tx rate %lu\n", rate);
+	err = dwmac_set_tx_clk_gmii(dwmac->clk_tx, speed);
+	if (err == -ENOTSUPP)
+		dev_err(dwmac->dev, "invalid speed %dMbps\n", speed);
+	else if (err)
+		dev_err(dwmac->dev,
+			"failed to set tx rate for speed %dMbps: %pe\n",
+			speed, ERR_PTR(err));
 }
 
 static void imx93_dwmac_fix_speed(void *priv, unsigned int speed, unsigned int mode)
Signature · 1 line
2.30.2