Skip to contentSkip to conversation

Concerning a driver rewrite (NOT THE KERNEL)

DISCUSSION victor1 torres 3 participants 4 messages Dec 21, 2001 – Dec 25, 2001

lore
Share & tools
lore
#0 lore raw

Alan-
(How do you intend the two pieces to interact ?)
I intend for the two pieces to interact with each other since they both have access to the DSP. (DSP code will be aviable in late Janurary for the Modem). (If you are also loading the sound driver you are likely to get into a mess
with current 2.4 because the sound code sticks its nose into the codec bus
somewhat further nowdays. )
I understand that the codec sticks its nose into the codec bus but can�t I add another (nose) into it also.
You driver also seems to be assuming the sound
driver has initialised the codec bus and codecs.) How could I fix it if the sound codec is not initialised so that the modem codec could initialised the codec bus and codecs? Thank you

_________________________________________________________________
MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx

#1 lore raw
Quoted 4 lines

You driver also seems to be assuming the sound
driver has initialised the codec bus and codecs.) How could I fix it if the sound codec is not initialised so that the modem codec could initialised the codec bus and codecs?

As far as I can tell from a scan of the docs you need the drivers to co-operate because if that isn't done if the modem driver inits the AC97 then it will break running audio (and vice versa). The sound driver also has the interrupt line and status handling so that appears to need to become shared code - or with the sound driver calling out to the modem driver.

My i810 board doesn't have a modem or an AMR slot but I can certainly help integrate the pieces. Right now Doug Ledford is doing major reworking on the i810 driver (and having tried to fix audio bugs in that before I really appreciate him taking on that battle) but after that I'm happy to give you a hand

#2 lore raw
In reply to victor1 torres

Hi!

Quoted 5 lines

(How do you intend the two pieces to interact ?)
I intend for the two pieces to interact with each other since they both have

access to the DSP. (DSP code will be aviable in late Janurary for the Modem).

Wow! Does that mean that this winmodem will be supported with linux for data calls? Finally some winmodem manufacturer that saw the light ;-). Will DSP code be binary only or will it include source? [I guess binary only, but...]
Pavel

Signature · 2 lines
(about SSSCA) "I don't say this lightly.  However, I really think that the U.S.
no longer is classifiable as a democracy, but rather as a plutocracy." --hpa
#3 lore raw
Quoted 4 lines

Wow! Does that mean that this winmodem will be supported with linux for data calls? Finally some winmodem manufacturer that saw the light ;-). Will DSP code be binary only or will it include source? [I guess binary only, but...]

The line interface on the i810 chipset seems to be totally documented. Its a dumb digitizer with AC97 2.0 modem on it.

Alan