Skip to contentSkip to conversation

odd memory behaviour in 2.4.15

DISCUSSION Adam Margulies 2 participants 2 messages Nov 13, 2001

lore
Share & tools
lore
#0 lore raw

I know this has been covered before, however I
am puzzled by this situation and so am asking the list for help.

I have a rack of 14 linux machines, each with 4GB of RAM. They run great, no problems, using the 2.4.10 kernel.

I have a separate linux machine with identical hardware running 2.4.15 which also ran well, until I upgraded its memory to 4GB. Then it ran 3 times slower than with 1 GB of RAM.

I know the solution is to put an "append="mem=3900M"" in lilo.conf, sacrificing 287MB in the process, but my question is why do I have to do this? and why do the 4GB 2.4.10 machines run fine without it?

I've compared their .configs and while they are different they aren't different in the important settings, such as the memory configuration settings. So I don't think it is a kernel config issue.

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp

#1 lore raw
Quoted 3 lines

I have a separate linux machine with identical hardware running 2.4.15 which also ran well, until I upgraded its memory to 4GB. Then it ran 3 times slower than with 1 GB of RAM.

We end up copying data around a lot more with the 4 or 64Gb kernels. Some of this unneccessarily. It may be down to your workload it might be a vm quirk. Do the boxes all run the same workload.

Jens Axboe has patches for some setups that basically kill the slowdown for all cases providing your I/O controller is sane