Skip to contentSkip to conversation

:MTRR support doesn't work properly with Rage128 pro based card

BUG Vincenzo Cuciti 3 participants 3 messages Feb 2, 2002

lore
Share & tools
lore
#0 lore raw

[1.] One line summary of the problem:
MTRR support doesn't work properly with Rage128 pro based card.
[2.] Full description of the problem/report:
Graphic acceleration features do not work under X since I
installed kernel
release 2.5.0.
The problem arises mainly with games which use 3D rendering
features
(such as Tux Racer, Gl Tron ecc.)
I tried to patch with 2.5.1, 2.5.2, 2.5.3-pre6 : I saw no
improvement.
[3.] Keywords (i.e., modules, networking, kernel):
mtrr , r128, dri, kernel, graphic acceleration
[4.] Kernel version (from /proc/version):
2.5.3-pre6 (since 2.5.0)
2.4.3 behaves correctly
[5.] Output of Oops.. message (if applicable) [snip]

        (From /var/log/kernel/warnings)
        mtrr: no MTRR for dc000000,2000000 found

[6.] A small shell script or example program which triggers the
problem (if possible)
Not available
[7.] Environment

        Kde 2.1.1
        XFree86 ver. 4.0.3
[7.1.] Software (add the output of the ver_linux script here)
        Linux QUENTIN 2.5.3-pre6 #8 mer gen 30 20:13:17 EST 2002 i686 
unknown
        Gnu C                  2.96
        Gnu make               3.79.1
        binutils               2.10.1.0.2
        util-linux             2.10s
        mount                  2.11b
        modutils               2.4.3
        e2fsprogs              1.19
        PPP                    2.4.0
        Linux C Library        2.2.2
        Dynamic linker (ldd)   2.2.2
        Procps                 2.0.7
        Net-tools              1.59
        Console-tools          0.2.3
        Sh-utils               2.0
        Modules Loaded         via82cxxx_audio ac97_codec 8139too crc32 
ov511
                                usb-uhci usbcore nls_iso8859-1 nls_cp850
[7.2.] Processor information (from /proc/cpuinfo):
        processor       : 0
        vendor_id       : GenuineIntel
        cpu family      : 6
        model           : 8
        model name      : Pentium III (Coppermine)
        stepping        : 3
        cpu MHz         : 598.483
        cache size      : 256 KB
        fdiv_bug        : no
        hlt_bug         : no
        f00f_bug        : no
        coma_bug        : no
        fpu             : yes
        fpu_exception   : yes
        cpuid level     : 2
        wp              : yes
        flags           : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge 
mca cmov
pat pse36 mmx fxsr sse
        bogomips        : 1192.75
[7.3.] Module information (from /proc/modules):
        via82cxxx_audio        17792   2
        ac97_codec              9456   0 [via82cxxx_audio]
        8139too                12464   1 (autoclean)
        crc32                    896   1 (autoclean) [8139too]
        ov511                  72176   0
        usb-uhci               21360   0 (unused)
        usbcore                55568   1 [ov511 usb-uhci]
        nls_iso8859-1           2880   1 (autoclean)
        nls_cp850               3616   1 (autoclean)
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
        (from /proc/iomem)
        00000000-0009fbff : System RAM
        0009fc00-0009ffff : reserved
        000a0000-000bffff : Video RAM area
        000c0000-000c7fff : Video ROM
        000f0000-000fffff : System ROM
        00100000-07febfff : System RAM
                00100000-002395c9 : Kernel code
                002395ca-00291fef : Kernel data
        07fec000-07feefff : ACPI Tables
        07fef000-07ffefff : reserved
        07fff000-07ffffff : ACPI Non-volatile Storage
        da000000-da0000ff : Realtek Semiconductor Co., Ltd. RTL-8139
                da000000-da0000ff : 8139too
        da800000-daffffff : PCI Bus #01
                da800000-da803fff : ATI Technologies Inc Rage 128 PF
        db000000-db0000ff : Motorola SM56 PCI Modem
        dbf00000-dfffffff : PCI Bus #01
                dc000000-dfffffff : ATI Technologies Inc Rage 128 PF
        e0000000-e7ffffff : VIA Technologies, Inc. VT82C693A/694x [Apollo 
PRO133x]
        ffff0000-ffffffff : reserved
        (from /proc/ioports)
        0000-001f : dma1
        0020-003f : pic1
        0040-005f : timer
        0060-006f : keyboard
        0080-008f : dma page reg
        00a0-00bf : pic2
        00c0-00df : dma2
        00f0-00ff : fpu
        0170-0177 : ide1
        01f0-01f7 : ide0
        02f8-02ff : serial(auto)
        0376-0376 : ide1
        03c0-03df : vga+
        03f6-03f6 : ide0
        03f8-03ff : serial(auto)
        0cf8-0cff : PCI conf1
        9800-98ff : Realtek Semiconductor Co., Ltd. RTL-8139
                9800-98ff : 8139too
        a000-a003 : VIA Technologies, Inc. AC97 Audio Controller
                a000-a003 : via82cxxx_audio
        a400-a403 : VIA Technologies, Inc. AC97 Audio Controller
                a400-a403 : via82cxxx_audio
        a800-a8ff : VIA Technologies, Inc. AC97 Audio Controller
                a800-a8ff : via82cxxx_audio
        b000-b01f : VIA Technologies, Inc. UHCI USB (#2)
                b000-b01f : usb-uhci
        b400-b41f : VIA Technologies, Inc. UHCI USB
                b400-b41f : usb-uhci
        b800-b80f : VIA Technologies, Inc. Bus Master IDE
                b800-b807 : ide0
                b808-b80f : ide1
        d000-dfff : PCI Bus #01
                d800-d8ff : ATI Technologies Inc Rage 128 PF
        e400-e4ff : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
        e800-e80f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]

[7.5.] PCI information ('lspci -vvv' as root)

00:00.0 Host bridge: VIA Technologies, Inc. VT82C691 [Apollo PRO] (rev c2)
Subsystem: Asustek Computer, Inc.: Unknown device 8020
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2
Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=x2
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3 AGP] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: da800000-daffffff
Prefetchable memory behind bridge: dbf00000-dfffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev 22)
Subsystem: Asustek Computer, Inc.: Unknown device 8020
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:04.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 10) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at b800 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:04.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10) (prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at b400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:04.3 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10) (prog-if 00 [UHCI])
Subsystem: Unknown device 0925:1234
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at b000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:04.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev
30)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:04.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 [Apollo Super AC97/Audio] (rev 20)
Subsystem: Asustek Computer, Inc.: Unknown device 1013
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 9
Region 0: I/O ports at a800 [size=256]
Region 1: I/O ports at a400 [size=4]
Region 2: I/O ports at a000 [size=4]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0a.0 Communication controller: Motorola SM56 PCI Modem
Subsystem: CIS Technology Inc SM56 PCI Speakerphone Modem
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (250ns min, 63750ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at db000000 (32-bit, prefetchable) [size=256]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0+,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME+

00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
Subsystem: Unex Technology Corp. ND010
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 9800 [size=256]
Region 1: Memory at da000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF (prog-if 00
[VGA])
Subsystem: ATI Technologies Inc: Unknown device 0018
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

       Latency: 64 (2000ns min), cache line size 08
       Interrupt: pin A routed to IRQ 11
       Region 0: Memory at dc000000 (32-bit, prefetchable) [size=64M]
       Region 1: I/O ports at d800 [size=256]
       Region 2: Memory at da800000 (32-bit, non-prefetchable) [size=16K]
       Expansion ROM at dbfe0000 [disabled] [size=128K]
       Capabilities: [50] AGP version 2.0
               Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
               Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x2
       Capabilities: [5c] Power Management version 2
               Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA

PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

[7.6.] SCSI information (from /proc/scsi/scsi)
Not available (no scsi devices mounted)
[7.7.] Other information that might be relevant to the problem

                (from /proc/mtrr)
                reg00: base=0x00000000 (   0MB), size= 128MB: write-back, 
count=1
                reg01: base=0xe0000000 (3584MB), size= 128MB: 
write-combining, count=2
                reg02: base=0xdc000000 (3520MB), size=  64MB: 
write-combining, count=4
                        slot     offset       size type flags    address 
mtrr
                (from /proc/dri/0/vm)
                0 0xda800000 0x00080000  REG  0x02 0xca883000 none
                1 0xe0302000 0x004e0000  AGP  0x00 0x00000000    1
                2 0xe0102000 0x00200000  AGP  0x00 0xcaa08000    1
                3 0xe0101000 0x00001000  AGP  0x02 0xcaa06000    1
                4 0xe0000000 0x00101000  AGP  0x02 0xca904000    1
                5 0xdc000000 0x02000000   FB  0x00 0xc887f000    2
                6 0xc887d000 0x00001000  SHM  0x20 0xc887d000 none

[X.] Other notes, patches, fixes, workarounds:
Nothing in particular.

Thanks in advance for help,
Vincenzo Cuciti

_________________________________________________________________
MSN Photos è il metodo più semplice per condividere e stampare le tue foto: http://photos.msn.it/Support/WorldWide.aspx

#1 lore raw
Quoted 2 lines
         Kde 2.1.1
         XFree86 ver. 4.0.3

XFree 4.1 is required for the 2.5 kernel DRM packages