Skip to contentSkip to conversation

soft or hard I2C code for AT91RM9200?

U-Boot-Users David A. Peters 1 participant 2 messages Sep 14, 2004 – Sep 15, 2004

lore
Share & tools
lore
#0 lore raw

Does anyone have I2C code for the AT92RM9200 that they would be willing to share? I am trying to get the soft I2C working, but I am struggling. Thank you!

#1 lore raw

I have the soft I2C working except for one small problem. When I try to read more than 2 bytes from the eeprom, I get the first two bytes, and anything else that follows is 0xFF. I've verified that data is written to the eeprom in other locations. I am using a 24AA256.
Has anyone else seen this problem?

-----Original Message-----
From: [email protected] [mailto:u-boot-users-admin at lists.sourceforge.net]On Behalf Of David A. Peters
Sent: Tuesday, September 14, 2004 3:10 PM
To: U-Boot Users List
Subject: [U-Boot-Users] soft or hard I2C code for AT91RM9200?

Does anyone have I2C code for the AT92RM9200 that they would be willing to share? I am trying to get the soft I2C working, but I am struggling. Thank you!

-------------------------------------------------------
This SF.Net email is sponsored by: thawte's Crypto Challenge Vl Crack the code and win a Sony DCRHC40 MiniDV Digital Handycam Camcorder. More prizes in the weekly Lunch Hour Challenge. Sign up NOW http://ad.doubleclick.net/clk;10740251;10262165;m
_______________________________________________
U-Boot-Users mailing list
U-Boot-Users at lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/u-boot-users